Me and ???? are working

Topic: Me and ???? are working (Read 2657 times) previous topic - next topic

Me and ???? are working

Reply #15 – November 23, 2006, 10:32:32 AM

So, were the teeth all chewed up on the flexplate?

Me and ???? are working

Reply #16 – November 23, 2006, 10:46:59 AM

finding new ways to keep your post-w status?

Me and ???? are working

Reply #17 – November 23, 2006, 11:06:37 AM

Ok, Since I just got up, the pisc will be alittle longer. John ( Cougar8775) was here helping me. The teeth on the flex were flat because the starter was grinding on it. Why I have no idea but it took 2 starters to figure this out. I have the garrage for 2 more days so if there are any cheap of free mods I can do let me know. I wana get as much done in the time I have.

Me and ???? are working

Reply #18 – November 23, 2006, 01:37:13 PM

Bleed the brakes.

Me and ???? are working

Reply #19 – November 23, 2006, 01:55:40 PM

finding new ways to keep your post-w status?
__________________

Me and ???? are working

Reply #20 – November 23, 2006, 03:30:44 PM

Well the rear brakes are shot, so right now it has none at all. Bleeding will not fix it. Does anyone have any cheap, maybe local brake parts. I have the finned drum brakes and need basicaly every single rear brake part.

Me and ???? are working

Reply #21 – November 23, 2006, 03:38:21 PM

yeah i know we need to get them brakes worked out. but now think of the nice burnouts:banana:

and it was nice driving it for a bit before it quit on me. We gotta get them vac leaks on it and but it will get done:evilgrin:

Me and ???? are working

Reply #22 – November 23, 2006, 05:36:48 PM

Mike, rear brakes are cheap. If I remember, you can get a set of shoes and brake hardware for under $30 for both wheels.

Me and ???? are working

Reply #23 – November 23, 2006, 05:39:30 PM

Quote from: 84 Fila;115226

Well the rear brakes are shot, so right now it has none at all. Bleeding will not fix it. Does anyone have any cheap, maybe local brake parts. I have the finned drum brakes and need basicaly every single rear brake part.

How is every single part worn out. The only parts to go bad are the shoes, wheel cylinders, and adjusters. That stuff is pretty cheap.

Me and ???? are working

Reply #24 – November 23, 2006, 05:49:07 PM

The return springs can wear out and sometimes break when you're taking 'em off. Even so, it's like $5 for the hardware kit for both wheels.

But, some other mods might be more important.

Me and ???? are working

Reply #25 – November 23, 2006, 05:50:36 PM

I wish I knew you needed that stuff.I just swapped out the rear in my car about a month ago and threw most every old part away.I'll check my extra rear axle out in the garage.It's been out there under the bench for about 6 years.I don't remember much about it.If I have the parts,you can have them.

Me and ???? are working

Reply #26 – November 23, 2006, 06:21:39 PM

find a TC rear end

Me and ???? are working

Reply #27 – November 23, 2006, 06:26:19 PM

Me and John are looking into the T/c rear. And every part was rusted, worn or broken off. It sat for too long and rusted and broke the springs. The drums havwe deep groves, the shoe's are gone, the springs are rusted or broke and the wheel cylenders are both leaking. So as I see it, I need everything.

Me and ???? are working

Reply #28 – November 23, 2006, 06:29:42 PM

its less than 25$ for brakepads AND springs i just did mine, and it only ran me about 25bux.

go for new.. it saves your ass in the long run.

Common sense.

Me and ???? are working

Reply #29 – November 23, 2006, 10:08:13 PM

Look like no more joy rides till I get paid on saturday then.