Skip to main content ↑ ↓
Topic: 7.5 Traction Lock (Read 665 times) previous topic - next topic

7.5 Traction Lock

Hi, I'm looking for a good factory traction-lock unit for an 87' Tbird with 7.5" and 2.73 gears. Tag code "M"
Quoting Thunder Chicken
- any 83-86 Turbo Coupe or XR7, 87-88 Sport or 87 XR7 would have factory 7.5" traction lock, as well as some Ford Rangers, Aerostars, and pre-86 5.0 Mustangs.-

 Warning! Seller has got to box it and ship to Linden NewJersey.
I've got a re-shipping adress there to take it to Norway.
BobNorway;)
There are only two tools you will ever need:
1) WD40
2) Duct Tape
If it doesn't move and should, use the WD40.
If it moves and shouldn't, use the duct tape.

7.5 Traction Lock

Reply #1 –
Hey Bob,There is alot of 7.5 parts on ebay,If no one here can help you?,you can use my address to have it sent and I will resend it to you.Or have it sent to linden NJ.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

7.5 Traction Lock

Reply #2 –
Thanks!
I appreciate that.
I'm following Ebay and having a dicussion with Roland Ford Motorsports now.
BobNorway;)
There are only two tools you will ever need:
1) WD40
2) Duct Tape
If it doesn't move and should, use the WD40.
If it moves and shouldn't, use the duct tape.
 

7.5 Traction Lock

Reply #3 –
I just jumped in and ordered one from Roland at Bryant Motorsports.
A very helpfull guy.
BobNorway;)
There are only two tools you will ever need:
1) WD40
2) Duct Tape
If it doesn't move and should, use the WD40.
If it moves and shouldn't, use the duct tape.