Skip to main content
Topic: Anyone here running SN95 springs? (Read 1009 times) previous topic - next topic

Anyone here running SN95 springs?

I figure this has been asked before, but I figured I'd ask out of curiosity. If any of you are running SN95 springs, what year did they come off of, and how does your car sit with them?

Also, I installed the airbags I bought from 5.8fastcat just a couple days ago, and I noticed that they raised the ass end of the car a bit. I have this set of SN95 springs that I bought a few years ago (I can't even remember what year car they're from, does anyone know ford part numbers? They're F4ZC-5310-GA), and I'm curious as to whether the back end of the car would be more around stock height or so with the SN95 springs & airbags in the back. I assume the bags would make up for the lower spring rate of the springs but I don't know.

Garrett H.
'94 F250 XLT- 4x4, 5 speed, 7.3 IDI Turbo Diesel, 4" intake, 4" exhaust, 5" turnout stacks, manual hubs, etc.
'87 Thunderbird Turbo Coupe
Engine, wheels, tires, etc!
Exhaust sound clip
Another clip

Anyone here running SN95 springs?

Reply #1
Lowering springs or just springs in general? I had a set of Bullitt springs on darkthunder.

But this is how she sat. Rear was about 1/2 lower than the front.
2005 Subaru WRX STi|daily driver

 

Anyone here running SN95 springs?

Reply #2
I meant stock SN95 springs, yeah.

Garrett H.
'94 F250 XLT- 4x4, 5 speed, 7.3 IDI Turbo Diesel, 4" intake, 4" exhaust, 5" turnout stacks, manual hubs, etc.
'87 Thunderbird Turbo Coupe
Engine, wheels, tires, etc!
Exhaust sound clip
Another clip