I need some help... February 12, 2006, 10:54:38 PM Yesterday i put in a new flywheel and clutch set since the old clutch was slipping really badly. now the clutch grabs really well but I have a rattle and a vibration at about 85mph the rattle comes around at about 2500 rpms. any idea? Quote Selected
I need some help... Reply #1 – February 13, 2006, 12:17:23 AM change the pilot bushing? Quote Selected
I need some help... Reply #2 – February 13, 2006, 01:00:03 AM Did you put the driveshaft back in the way it came out? If you didn't mark it try 180ing it on the yoke at the diff. Quote Selected
I need some help... Reply #3 – February 13, 2006, 09:24:39 PM pilot bearing is only 10,000 miles old so I didnt mess with it but I did put some grease on it, drive shaft was marked Quote Selected
I need some help... Reply #5 – February 14, 2006, 03:46:37 AM Quote from: 88turbopilot bearing is only 10,000 miles old so I didnt mess with it but I did put some grease on it, drive shaft was markedit is possible the grease pushed the bearing out. Quote Selected
I need some help... Reply #6 – February 14, 2006, 08:33:54 PM I barely dabbed some from my finger I didnt fill the cavity full. I am thinking it might be the plastic throwout bearing they gave me or the shifter fork that is missing one of the clips. not really sure Quote Selected
I need some help... Reply #7 – February 16, 2006, 08:38:23 PM well my rattle is now gone it was my breather cap sitting loose on the valve cover and the firewall vibration.... maybe it has been there all along Quote Selected
I need some help... Reply #8 – February 16, 2006, 09:22:35 PM plastic through out bearing...is that a hydrolic clutch thing? Quote Selected
I need some help... Reply #9 – February 16, 2006, 11:18:48 PM I dunno what he means by that, mine sure wasn't plastic, it's all metal. Quote Selected
I need some help... Reply #10 – February 17, 2006, 07:54:05 AM autozone sells the plastic ones, even for 5.0s. Quote Selected
Topic: I need some help... (Read 1530 times)
previous topic - next topic
