1986 cluster speed always says 0 September 14, 2014, 07:03:38 PM My cluster no longer has rpm which is fine wired up a tachometer but I kind need my speedo loll any idea why it wouldn't read I did swap from aod to T5 I see the vss is connected and in but is it possible to have it in and not have the gear spinning it? Quote Selected
1986 cluster speed always says 0 Reply #1 – September 14, 2014, 07:39:29 PM The t-5 gears are slightly different. I know some gears wont mesh properly and have to be trimmed in order to fit in an aod. id inspect the vss. Take a drill and hook it up to the vss, and see ifnyou have any speedo movement. If you do, id try ordering a new speedo gear, might need to get both a driven gear and the drive gear for a proper reading.Its faily simple to swap the driven gear, but youhave to remove the tailshaft and shifter, so id try just the drive gear on the vss first. Quote Selected
Topic: 1986 cluster speed always says 0 (Read 934 times)
previous topic - next topic
