Skip to main content ↑ ↓
Topic: From fuel injection to a carb (Read 1130 times) previous topic - next topic

From fuel injection to a carb

Hey everyone im putting a new engine into my thunderbird and its going to have a carb. now i know i have to put a different fuel pump in it for lower fuel pressure but what do i do for the kickdown cable on the aod trans?

From fuel injection to a carb

Reply #1 –
What year? I may be able to help with the fuel.
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done
 

From fuel injection to a carb

Reply #2 –
Lokar TV cable kit or you need a TV rod.  You will have to modify the TV rod by making it longer and bending it. 

[ATTACH=CONFIG]33716[/ATTACH]
84 TurboCoupe with 302 .010 over - 9.8 : 1 Forged Pistons - Edlebrock Goodies:  Aluminum Heads #6037, Intake #3821, 65mm TBI/EGR #3824/3827, Camshaft #3722 -  Interactive System & Technologies Mass Air with 24# Injectors - A9L - 3g Alternator - BBK shorties, Cat Converter H-pipe, Magniflow lers - World Class T5 1352-169 (1986, V8, WC, 3.15 3.35 1.93 1.29 1.00 0.68) OEM Clutch Cable - 7.5 Trac Lock with 3.08 and slapper bars from 82 Mustang.