Skip to main content ↑ ↓
Topic: Fully Custom 87 TC roller (Read 1261 times) previous topic - next topic

Fully Custom 87 TC roller

I dont have the time to complete her right now, so if someone wants her, and can give her a good home, then its time for her to leave the pack.

Good.
It has a one off custom body kit, 5 lug swap, MAC girdle, custom 5 lug axels that retained ebrake, cross drilled rotors, new custom rims, complete interior, remote TFI. It has many extras body wise

Bad.
No paperwork right now. I had a friend put a lean on it to keep her away from my evil ex, but he lost the paperwork since ownership. You have have to put a lean om her to register. She needs exhaust, trans, and engine. 

 http://s158.photobucket.com/albums/t97/biggrgivens/87%20TC%20progress/
http://i158.photobucket.com/albums/t97/biggrgivens/87%20White%20TC/whiteTCfront.jpg
http://i158.photobucket.com/albums/t97/biggrgivens/87%20White%20TC/whiteTCmain.jpg
http://i158.photobucket.com/albums/t97/biggrgivens/87%20White%20TC/87TCb.jpg
http://i158.photobucket.com/albums/t97/biggrgivens/87%20White%20TC/TCrear.jpg
http://i158.photobucket.com/albums/t97/biggrgivens/87%20White%20TC/87TCb.jpg

$800 or best offer
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Fully Custom 87 TC roller

Reply #1 –
Man if i could sell my 3.8 i'd be on my way to pick this up
[SIGPIC][/SIGPIC]

Fully Custom 87 TC roller

Reply #3 –
Quote from: 1Bad88tbird;389331
As usual, too far away!

My thoughts exactly!
...and there was light!

Fully Custom 87 TC roller

Reply #4 –
Always loved that car!!!
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

Fully Custom 87 TC roller

Reply #5 –
RDOG can we get some interior shots of the car was ,there a t5 in their before?
[SIGPIC][/SIGPIC]

Fully Custom 87 TC roller

Reply #6 –
No T5. I yank it out, to install in another car. I have a trans I can toss in but I cant vouch for its quality since its a jy pull. I will post more pics tomorrow. FYI: The body kit alone is worth $2000, and the 5 lug wheels are brand new, and worth over $600. The car just needs a motor and trans.  Picks to come of interior tomorrow
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Fully Custom 87 TC roller

Reply #7 –
cool, no i wondering if it was originally a manual or auto car
[SIGPIC][/SIGPIC]

Fully Custom 87 TC roller

Reply #8 –
It was a 5 speed. I wont buy autos because I'm to lazy to do the conversion. LOL!!
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Fully Custom 87 TC roller

Reply #9 –
That would be the perfect car for my super charged v6 any one how much it would cost to ship the car to kansas.

Fully Custom 87 TC roller

Reply #10 –
Quote from: jonwayne1988;389678
That would be the perfect car for my super charged v6 any one how much it would cost to ship the car to kansas.

 
Not my money, but based on what is represented and the asking price, it's worth the cost!

Should be pretty easy to find out.  Check this link: http://www.nationwidetransportservices.com/Kansas-to-California-auto-transport.asp

Fully Custom 87 TC roller

Reply #11 –
Quote from: jonwayne1988;389678
That would be the perfect car for my super charged v6 any one how much it would cost to ship the car to kansas.

 
yea that would be pretty bad ass

Fully Custom 87 TC roller

Reply #12 –
Dangit RDOG, I just bought a house! But I really want that car! (Not that I need it. At all)  good luck man!
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...
 

Fully Custom 87 TC roller

Reply #13 –
Still selling?