Skip to main content ↑ ↓
Topic: Motorsport rear lowering springs on a 86 TC (Read 1428 times) previous topic - next topic

Motorsport rear lowering springs on a 86 TC

I found a set of Motorsport lowering springs. They are B springs part#(rear) E5SC-5560-AA. Will they dump the rear to low in a 86 TC? I have an extra set of HR Turbo Coupe specific lowering springs for the front, which will drop the TC 1.5" up front.

Will these work for the rear or cause a squat?

I was thinking about using them on my black car.
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Motorsport rear lowering springs on a 86 TC

Reply #1 –
The B & C Kit rear springs are way too light and short for the TBirds/Cougars.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon

Motorsport rear lowering springs on a 86 TC

Reply #2 –
Thanks Chuck! Here is how car sits now...

How about 1986 SVO specific eibach springs?
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Motorsport rear lowering springs on a 86 TC

Reply #3 –
No idea.  No info on those.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon
 

Motorsport rear lowering springs on a 86 TC

Reply #4 –
Quote from: RDOG;378903
Thanks Chuck! Here is how car sits now...

How about 1986 SVO specific eibach springs?

Are those 10's on the back? Love the way it is feeled out
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )