Skip to main content ↑ ↓
Topic: Replacing batt cables (Read 1122 times) previous topic - next topic

Replacing batt cables

Ok, I have become dis-intrested in my cougar so am going to start driving my 83 Bird again but have a question. I am going to change the battery cables as these original ones are very brittle. The neg cable has a small bracket that mounts it to the fender apr0n and then it continues down to the block.  Does that bracket also work as a ground? Everything at the parts store is w/o the bracket so should I replace it and forget the bracket or use 2 cables, 1 from block to apr0n and 1 from apr0n to batt?
 

Replacing batt cables

Reply #1 –
You may find this helpful....... or as I did educational since this was my ride.:punchballs:


http://sbftech.com/index.php/topic,29696.msg315271.html#msg315271
84 COUGAR/90 HO, 1.7RRs, performer RPM,700DP, equal length shorties, stainless EXH ,T-5,Hurst pro-billet, KC clutch, 8.8/ 4.10s, line-lok, bla ,bla, bla.
71 COMET/289,351w heads, 12.5 TRWs, 750DP, Liberty TL, 9"/6.00s, 11.9x @112 , bla,bla,bla.

Never shoot your mouth off, unless your brain is loaded! ....I may get older, but I'll never grow up!....If you're not laughing, you're not living!  :laughing: