Skip to main content ↑ ↓
Topic: Steering Wheel Parts (Read 963 times) previous topic - next topic

Steering Wheel Parts

I'm in need of the contact ring and the black plastic ring that supports it. These two items are found on the back side of the steering wheel. My car is an 88 Turbo Coupe with cruise control. The plastic ring on mine broke into three pieces and while checking it out I noticed that the plastic insulators between the three contact discs are deteriorating as well.
Thanks,

Rick
[SIGPIC][/SIGPIC]
1988 T/C body with a 5.0 transplant. Motor has a Vortech V-2 supercharger, Edlebrock Performer RPM II intake, heads, FRPP F-303 cam, Comp Cams roller rockers, Power Pipe, LMAF, full Mac exhaust, lowered, Koni's, 5 lug conversion, Cobra wheels, 13" Cobra brakes, etc.
SOLD September 2020. Will miss this car after 19 years of building/driving/showing it off. Time for a new chapter in my life.
Dynoed 446 horse/409 torque at the wheels.
2003 Tenth Anniversary Cobra Convertible. 1 of 369 Torch Red made.
2021 Chevrolet 3500 dually, crew cab Duramax.

Re: Steering Wheel Parts

Reply #1 –
Good luck finding one - here's a thread on the subject (with a part number on the last page):

http://www.foxtbirdcougarforums.com/showthread.php?t=723&page=3&highlight=horn+ring
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣
 

Re: Steering Wheel Parts

Reply #2 –
Carmen: Last week I tried my local Ford dealer for this part and he did a search and gave me a couple of leads and one of the dealers in PA had one in his inventory ($39 + shipping). It arrived yesterday, so I'm all set. Thanks for the link with the part number.

Rick
[SIGPIC][/SIGPIC]
1988 T/C body with a 5.0 transplant. Motor has a Vortech V-2 supercharger, Edlebrock Performer RPM II intake, heads, FRPP F-303 cam, Comp Cams roller rockers, Power Pipe, LMAF, full Mac exhaust, lowered, Koni's, 5 lug conversion, Cobra wheels, 13" Cobra brakes, etc.
SOLD September 2020. Will miss this car after 19 years of building/driving/showing it off. Time for a new chapter in my life.
Dynoed 446 horse/409 torque at the wheels.
2003 Tenth Anniversary Cobra Convertible. 1 of 369 Torch Red made.
2021 Chevrolet 3500 dually, crew cab Duramax.