Skip to main content ↑ ↓
Topic: Anyone Have PDF of Binder Versions of Shop Manuals (Read 1363 times) previous topic - next topic

Anyone Have PDF of Binder Versions of Shop Manuals

I'm looking for a PDF(copy of shop manual on the computer) or one of the shop manuals that came in a 3 ring binder for 1988. What I want to be able to do is make a PDF of the shop manauls, and post them on here, so if anyone needs one small section, they can print it out, and use it, and not have to get a shop manual covered in grease and so forth. I've got the machines do to it at work, it would jsut be easier if the pages were already lose leaf.


I know the EVTM's were scanned in by a fellow member, now It'd like to to the Shop Manuals.

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #1 –
Or, if anyone has a ratty old shop manual they don't want anymore, I could gladly provide you with a new crisp copied one in a binder. :) Just a thought.

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #2 –
Jcassity may have some advice for you on that.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #3 –
I actually bought a pdf copy for $9
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #4 –
what? Where? How? Is it an 88? lol It is clear and easily readable?

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #6 –
Quote from: JeremyT;328484
I think you will run into trouble posting the content (copies) here as it's copyright material and Helm will need to give you the permission to do so.


I'm pretty sure the admins here won't let you post an entire manual for fear of the board getting shut down for legal reasons. you would have to host it, link it, an assume the responsibilities of hosting copyrighted material without permission.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #7 –
Quote from: jpc647;328472
what? Where? How? Is it an 88? lol It is clear and easily readable?


yes and yes, it was a copy of fords publications. I believe it covers all the years and makes from the 80s, up to 92. been a while since I looked at it (couple years)
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #8 –
Quote from: daminc;328493
yes and yes, it was a copy of fords publications. I believe it covers all the years and makes from the 80s, up to 92. been a while since I looked at it (couple years)



So its like the full shop manuals for all the years? Do you remember where you got it?

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #9 –
Got it on Ebay. its a bootleg copy
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

Anyone Have PDF of Binder Versions of Shop Manuals

Reply #10 –
Well he did say he wanted to post them here.

Don't get me wrong, helping out with the information is something that makes these communities what they are. Not everyone has access to the material or can afford the price of the material. But when you take entire books and attempt to distribute them as suggested, it could create issues. Helm still prints these books with a hefty price.

Quote from: daminc;328492
I'm pretty sure the admins here won't let you post an entire manual for fear of the board getting shut down for legal reasons. you would have to host it, link it, an assume the responsibilities of hosting copyrighted material without permission.