Skip to main content
Topic: Wet drivers side floor. (Read 780 times) previous topic - next topic

Wet drivers side floor.

Used the search and see that this more often than not is the hood release cable grommet. Since my 87 has now developed this leak was wondering what you guys have used to reseal this hole. Thanks

Wet drivers side floor.

Reply #1
mine collected water there from the floorboard/floorpan. It had a rusty hole under the accelerator pedal. some of them leak from the a pillar area on the firewall where the windshield is.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

 

Wet drivers side floor.

Reply #2
there's also a hole right by the mid upper part of the hood hinge that has seam sealer in it. it will come from there too if it starts to come loose
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook