Skip to main content ↑ ↓
Topic: Full Digital Dash installment (Read 1190 times) previous topic - next topic

Full Digital Dash installment

Ok I am gonna be installing the Full Digital Dash from the base digital.

I have the whole dash off so I'm gonna run the wires which need to be ran..  I know there are two tach strap wires to run from the cluster to engine bay.  I also have a wire going from cluster to computer for the fuel piN #34.  Is there any other wires I have to run before I put the dash on?
.: Lastest :.

Full Digital Dash installment

Reply #1 –
do you want full digi cluster diagrams and base cluster diagrams?

Full Digital Dash installment

Reply #2 –
Did you replace your oil pressure, water temp and fuel gauge sending units?
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Full Digital Dash installment

Reply #3 –
I didn't change the oil, or water temp, only the fuel Didn't know u needed to change the oil and water...  So Im guessing I need to get those now * screams Dam it more parts to look for.*

Also jcassity could u please send those diagrams?
.: Lastest :.

Full Digital Dash installment

Reply #4 –
Yeah, you've gotta replace all the senders...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣
 

Full Digital Dash installment

Reply #5 –
Quote from: Thunder Chicken;181333
Yeah, you've gotta replace all the senders...


Find a Mark VII at a yard.  It'll have the senders you need.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!