Skip to main content ↑ ↓
Topic: Pic Request!? (Read 893 times) previous topic - next topic

Pic Request!?

i need a pic of the shifter cable connecting to the shifter arm on the tranny. Odd question but i think i ude the wrong bolt and adjusting it is difficult
1986 Cougar LS

Pic Request!?

Reply #1 –
The "bolt" is actually a press in stud that has a shoulder and threads.The fastener presses into a hard rubber grommet on the shift lever on the side of the tranny,then,the shift cable fits over the shoulder on the fastener,THEN,a nut goes on to hold the cable still.The end of the cable has a "slot" so it can be adjusted.Sorry,it frickin icy as  and I am NOT going out there right now.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

Pic Request!?

Reply #2 –
This is the only pic I have (someone else's), and it already has the connection circled, with an arrow to the grommet....

Second pic is a drawing showing stud 78415 going into bushing 7341.
.
Death awaits you all with nasty, big, pointy teeth.

1988 5.0 Bird, mostly stock, partly not, now gone to T-Bird heaven.
1990 Volvo 740GL. 114 tire-shredding horsies, baby!