Mark vii rear rotor/same hub size?? December 21, 2006, 01:17:22 PM Curious,anybody know if the mark vii rotor has the same hub center size(where the axle comes through the center) as the rear tc rotor???I know the mark rotors won't work on a tc but if it has the same hub size i can use one as a template for drilling my stock axles and have the perfect lug centric spacing instead of trying to measure it out and screwing it up. Quote Selected
Mark vii rear rotor/same hub size?? Reply #1 – December 21, 2006, 01:27:39 PM I can take a look at the Mk7/SVO rear axle in my 80 XR-7 and see if the center hub is the same as the 95 Cobra wheel that's on it... I think it's smaller. Quote Selected
Mark vii rear rotor/same hub size?? Reply #2 – December 21, 2006, 01:30:59 PM A measurement would be nice for future reference. SN95 = 70.5mm Quote Selected
Mark vii rear rotor/same hub size?? Reply #3 – December 21, 2006, 02:47:40 PM Well, I'll get a measurement only if it stops raining.... Quote Selected
Mark vii rear rotor/same hub size?? Reply #4 – December 21, 2006, 08:14:01 PM I need it to be the same size as my stock TC axle hub as i am looking for a template to drill my axles to 5lug.I guess i could probably use an areostar drum as well??I will be removing the axles and studs then putting the axle straight up and down in a vice.Then i will put the rotor/drum on and drill the holes using the mark brake rotor or areostar drum. Quote Selected
Mark vii rear rotor/same hub size?? Reply #5 – December 21, 2006, 09:06:05 PM A quick look in the dark and rain shows it to be the same as the SN-95 stuff...so bigger. Quote Selected
Mark vii rear rotor/same hub size?? Reply #6 – December 22, 2006, 12:04:34 AM So then an aerostar drum would be correct sizing??? Quote Selected
Mark vii rear rotor/same hub size?? Reply #7 – December 22, 2006, 07:06:07 AM Perhaps.I know my old Ranger stuff was smaller, and they are the same as the Aerostar...so following that line of thinking, the Aerostar stuff should work. Quote Selected
Topic: Mark vii rear rotor/same hub size?? (Read 1372 times)
previous topic - next topic
