cobra r question

Topic: cobra r question (Read 1263 times) previous topic - next topic

cobra r question

March 06, 2006, 09:51:10 PM

What all would need to be done to fit some 17 x 9" cobra r's under an 86 cougar. I still have the 4 lug setup with stock brakes. Just woundering if it takes major modifications because of the width. thanks- Dennis

cobra r question

Reply #1 – March 06, 2006, 10:29:33 PM

as long as the offset is right they will bolt right up. I assume you are talking about the 4 lug aftermarket wheels.

cobra r question

Reply #2 – March 06, 2006, 10:37:45 PM

I just did this on my TC

cobra r question

Reply #3 – March 06, 2006, 11:12:05 PM

I have also put 17x9's on my car, i have experienced only one problem outside tire rubbing over large humps in the road, i just pushed in the inside lip of the front fenders and it has virtually disappeared completely. I am using 245/45 bf goodrich G-force tires..

wheel specs

Reply #4 – March 07, 2006, 12:15:31 AM

so here are specs on the wheels im thinking of- from what iv read on cool cats it sounds like they'r right- So from the few responses it sounds like i wuldnt need spacers? please let me know- thanks

The wheels are 17x9 with a 5.78" backspace(+20mm offset) . The lug pattern is 4x4.25 (108mm).

backspacing

Reply #5 – March 07, 2006, 12:20:29 AM

Actually is that baskspacing to much "The wheels are 17x9 with a 5.78" backspace(+20mm offset) . The lug pattern is 4x4.25 (108mm)."