1.7 roller rockers needed July 09, 2013, 09:15:55 PM need roller rockers for a build running against GT heads.need 1.7's or a trusted source you guys know about that i could get them from. Quote Selected
1.7 roller rockers needed Reply #2 – July 15, 2013, 11:11:55 AM $125 plus shipping. Not a bad deal......http://forums.corral.net/forums/windsor-engine-parts/1430064-holley-alum-heads-crane-rockers.html Quote Selected
1.7 roller rockers needed Reply #3 – July 22, 2013, 12:15:44 PM guess i gotta be a member over there...i cant say i trust parts off the mustang crowd,, dont exactly know why but you never know, these could be good Quote Selected
1.7 roller rockers needed Reply #4 – July 22, 2013, 12:45:19 PM I will match their price. I have a set that were pulled from a '93 Cobra (along with its heads and intake) years ago. Worked great on the GT40 and GT40P heads I used them on, although the Energizers seem to be noisier than most rocker arms. Quote Selected
1.7 roller rockers needed Reply #5 – July 22, 2013, 01:21:34 PM Quote from: jcassity;419018guess i gotta be a member over there...i cant say i trust parts off the mustang crowd,, dont exactly know why but you never know, these could be good:beatyoass: :hick: lolUs stang guys have all the good stuff :) Quote Selected
1.7 roller rockers needed Reply #6 – July 22, 2013, 03:40:45 PM Quote from: STANG8U;419024 :hick: lolUs stang guys have all the good stuff :) but most are pen 15s!!!! Quote Selected
1.7 roller rockers needed Reply #7 – July 22, 2013, 03:45:51 PM Not the fox guys :) But if you drive a 03-04 cobra any newer saleen roush or gt500 your most Likly a prick lol Quote Selected
1.7 roller rockers needed Reply #8 – July 23, 2013, 09:27:33 AM you guys avitars are like the same but opposite,, wierdpm'd you seek Quote Selected
1.7 roller rockers needed Reply #9 – July 23, 2013, 02:51:27 PM I just received a message about full PM. I have cleared it out.50 messages isn't a lot... Quote Selected
1.7 roller rockers needed Reply #10 – July 25, 2013, 10:49:29 PM I think my buddy may have a set, Id have to ask him for sure. I dont know what he'd want for them, but I do know he didnt run them long and they are aftermarket ones. Quote Selected
1.7 roller rockers needed Reply #11 – January 02, 2014, 09:55:55 AM need another set of 1.7 rollers if anyone has a set Quote Selected
1.7 roller rockers needed Reply #12 – February 09, 2014, 04:18:23 AM ttti have a set of 1.6 rollers for 7/16 stud heads i cant use Quote Selected
Topic: 1.7 roller rockers needed (Read 750 times)
previous topic - next topic
