Skip to main content ↑ ↓
Topic: Best power sources flex a lite fan (Read 868 times) previous topic - next topic

Best power sources flex a lite fan

What power sources did you guys use for the aftermarket fan setup? I was thinking of using the battery with a fusible link for the constant, and the wire coming from the stock boost solenoid for the on/off key power.

Bascically I am only using the "B", "G", and the + on the flex a lite thermostat control.

I am using the stock original fan wiring for the pusher fan I am putting on AC condensor, because I still have A/C and it keeps it simple.

I was even considering the two wires coming of the external voltage regulator (86 TC wiring) because one is constant and the other is key on/off.

Here are the flexalite instructions..
http://www.flex-a-lite.com/auto/175-99970.pdf


What do you guys suggest
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!
 

Best power sources flex a lite fan

Reply #1 –
Probably not any help to you, but my TC had the fans wired to a switch mounted in the dash. Good for winter days, you could heat up the car faster, but sort of a pain. I don't recommend it, lol.