Skip to main content ↑ ↓
Topic: stumped on injectors. (Read 621 times) previous topic - next topic

stumped on injectors.

im wanting to know if i can run 19lb injectors on my 5.0L SO computer?


But I have swiched over to the HO upper plenum with 3/8inch spacer and 60mm throttle body.

1978 Ford Thunderbird Town Landau.
351 mod... not for long :beatyoass:

stumped on injectors.

Reply #1 –
No, sure can't. You CAN run the HO upper/lower, but you gotta switch the injectors, cam, and EEC all at the same time to avoid any issues.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)
 

stumped on injectors.

Reply #2 –
Just keep the 14's that are on there.19's are not needed with an SO engine.Do the H.O conversion,then add the 19's.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..