Skip to main content ↑ ↓
Topic: Fuel tank vent seal needed... (Read 501 times) previous topic - next topic

Fuel tank vent seal needed...

I've looked through the Ford dealership and the local parts stores.Anyone here have one,or know where to get a new one?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel tank vent seal needed...

Reply #1 –
F6TZ-9B076-AA

is what I used

Fuel tank vent seal needed...

Reply #2 –
Thanks a lot.I'll call the dealership Monday and pass on that number to them.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel tank vent seal needed...

Reply #3 –
I used an ATV or dirt bike gas cap vent
http://cgi.ebay.com/ebaymotors/GAS-CAP-VENT-HONDA-XR-CRF-KX-RM-YZ-XR-50-65-85-125-250_W0QQcmdZViewItemQQcategoryZ35586QQihZ006QQitemZ160258624256QQrdZ1QQsspagenameZWDVW
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Fuel tank vent seal needed...

Reply #4 –
Vinnie I just checked and that part number mjbrbrd provided is a good part number and it should be less than $4.
One 88
 

Fuel tank vent seal needed...

Reply #5 –
I checked the Ebay part,nothing like mine.I need the rubber seal/grommet that the vent snaps into.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..