Setting base timing 88 TC June 26, 2008, 10:48:57 PM Hey all, dont meen to ask such a dumb question (and yes I feel dumb right now) but I might have figured out my engine running py issue. So the car states the timing to be set at 10* btdc. Ok well on the timing marks is that left or right of TC. BTDC reading on the tag goes to like 30 and ATDC goes to 10. When I set the timing at 10* btdc is that near the ATDC or BTDC, when It's at 10* BTDC it runs like a 3 cyl Geo Metro... Quote Selected
Setting base timing 88 TC Reply #1 – June 26, 2008, 10:58:11 PM Set it on the side with the most timing marks... BTW be sure to unplug the SPROUT connector... It's in the harness at the TFI module... Quote Selected
Setting base timing 88 TC Reply #3 – June 27, 2008, 12:58:24 AM Well it's set right.. The car smells of rich gas and it has a loss of power at the mid to high end... I checked the timing belt and cam positioning and all is right on.. I dont get it. Quote Selected
Topic: Setting base timing 88 TC (Read 696 times)
previous topic - next topic
