Skip to main content ↑ ↓
Topic: Got some parts for my cougar yesterday (Read 1593 times) previous topic - next topic

Got some parts for my cougar yesterday

Well, Like it says.
Found some parts for my car.


















[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Got some parts for my cougar yesterday

Reply #1 –
So (Jerry) after you are through picking out what you want the rest will be up for grabs right. :cool:

Got some parts for my cougar yesterday

Reply #2 –
Great score.Check for my PM's.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Got some parts for my cougar yesterday

Reply #3 –
Quote from: mercury-man;211696
So (Jerry) after you are through picking out what you want the rest will be up for grabs right. :cool:


That's right,
I will be keeping for sure:
The entire drivetrain and wiring minus rear end
heating and all cooling
computer and  all wiring
front clip and wiring
entire auto lighting package including lighted door stuff, switches and sensor
tripminder
heater core
windshield

I will let everyone know when I'm done and ready to part it out.
I'm thinking mabe in time for catjam.
I may load up my van with parts for the trip down there if anyone wants to meet up.

I'll keep everyone posted in the for sale section.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Got some parts for my cougar yesterday

Reply #4 –
Do I see 5 lugs on that rear?
1986 Cougar LS

Got some parts for my cougar yesterday

Reply #5 –
Quote from: cougar86_89;211734
Do I see 5 lugs on that rear?


you see wheel covers on those wheels. LOL
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Got some parts for my cougar yesterday

Reply #6 –
Quote from: daminc;211738
you see wheel covers on those wheels. LOL


wheel covers mean nothing to me though. especially after i saw that pic of the Camaro with the F-250 covers on it. those have 7 on them.

So its 5 up front too?

I got to stop looking at the pics i keep wanting more stuff. and i just saw the seatbelt covers by the buckles look really good. so does the top dash trim...
1986 Cougar LS

Got some parts for my cougar yesterday

Reply #7 –
Dibs already on the seatbelts and door panels !!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Got some parts for my cougar yesterday

Reply #8 –
Quote from: vinnietbird;211745
Dibs already on the seatbelts and door panels !!!!


 you Vinne. Always getting all the good stuff... Even if its for a Topez LOL
1986 Cougar LS

Got some parts for my cougar yesterday

Reply #9 –
I resemble that remark.LOL.I really do need those parts for the Sport.I find a lot of good stuff,and most of it goes to members here.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Got some parts for my cougar yesterday

Reply #10 –
I'm going to start pulling my parts from the interior this week.
when I'm done check the sale section on Monday for interior parts.

Jerry
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

Got some parts for my cougar yesterday

Reply #11 –
It's weird looking at that pic with 2 shifters in it:hick:
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!