Skip to main content
Topic: door window chrome (Read 1032 times) previous topic - next topic

door window chrome

Does anybody know if all the chrome moulding can be taken off and swapped to another door without too many problems on a 87-88 Cougar LS?

jerry
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

door window chrome

Reply #1
It's not super easy but not super hard either. It can be done, although I will warn that it's easy to bend if you're not careful.

door window chrome

Reply #2
Thanks for the bending warning Eric. I was just making sure the pieces came off and weren't pressed in as part of the door it's self.
I didn't want to ruin something I couldn't replace.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

door window chrome

Reply #3
I'm a little more familiar with 1983-86 doors but from what I remember on 1987-88:

Roll the window down and remove the door panel. You have to remove the outside mirror first. There should be a screw holding the trim on, underneath where the mirror was. The 1987-88 doors have a small trim piece in front of the mirror; I think that has to come off first. On the bottom piece, open the door and on the end where the B-pillar trim is, look underneath...there should be either a screw or a nut holding on the trim. Might be one along the dew wipe also (glass side). It kind of just flips up from there. You'll figure it out. I don't remember much about the top piece other than there are hidden clips that hold it on.

Hope that helps ya.

 

door window chrome

Reply #4
that helps me plenty.

Thanks
Jerry
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook