Skip to main content
Topic: Front blinkers not working? (Read 1228 times) previous topic - next topic

Front blinkers not working?

My front blinkers of my T-Bird do not blink but the back works fine. Also my car has side markers on the fender and those do turn on what could be the problem?
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

Front blinkers not working?

Reply #1
Bulbs?
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Front blinkers not working?

Reply #2
Well the bulbs are good tested some other ones and I checked to see if i was getting a flashing signal with a test light and I am. So what else could be the problem? Also my pass side marker light starts flashing after a couple of secs when the turn signal is activated. The park lights work fine and my driver side marker light does not flash and no the puppiesections are not mixed up.
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

Front blinkers not working?

Reply #3
If you're getting a flashing signal but the lights aren't coming on you pretty much have three possibilities: Bulbs, sockets, or grounds. You've already eliminated bulbs, and sockets are easy to check (just look inside 'em, or better yet, probe inside 'em with test light). The grounds for the light harness are on the top of the rad support (one at each end).
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Front blinkers not working?

Reply #4
When I checked to see if I had a flashing signal was inside the socket on the connector and the connections look good. Also my sockets have like alot of electrical grease or something inside can that cause a problem? Will look into the grounds next.
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

 

Front blinkers not working?

Reply #5
The grease shouldn't cause a problem - if anything it would cause the fuse to blow, which would result in no flashing signal.
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣