Skip to main content
Topic: Looking for a dash bezels. (Read 1103 times) previous topic - next topic

Looking for a dash bezels.

Hi,

I'm looking for a complete dash bezels (main and radio) in WOODGRAIN, I have a full console, the car is a '85, but 85-88 will fit...

Thanks,

Dom.
[SIGPIC][/SIGPIC]1985 Thunderbird 3.8 carbed 57k original, summer car.
1980 Econoline inline 6 300ci 300k, winter/working.
1988 Base Bird finally crushed... RIP.

Dominique,  The Ridiculous, Fordus, crazyous!!!  :birdsmily:

Looking for a dash bezels.

Reply #1
dominique, i have a set from an 85 cougar for sale. send me an email to mrcoffee402u@aol.com so i can reply with pictures, would have to find out shipping cost to canada. thanks! mark:D

Looking for a dash bezels.

Reply #2
Heres one on ebay.
http://cgi.ebay.com/ebaymotors/1988-88-thunderbird-Woodgrain-Dash_W0QQitemZ140086705198QQihZ004QQcategoryZ40017QQrdZ1QQcmdZViewItem
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Looking for a dash bezels.

Reply #3
I have a set out of and 88 in wood grain really nice pieces. I will tell you it is from a non console car. I'll sell them to you cheap. The car is getting taken to the salvage yard any day.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Looking for a dash bezels.

Reply #4


This is for a consolette, I have a full console, then the radio bezel don't fit great at the bottom....

Regards,

Dom.
[SIGPIC][/SIGPIC]1985 Thunderbird 3.8 carbed 57k original, summer car.
1980 Econoline inline 6 300ci 300k, winter/working.
1988 Base Bird finally crushed... RIP.

Dominique,  The Ridiculous, Fordus, crazyous!!!  :birdsmily:

Looking for a dash bezels.

Reply #5
Quote from: ipsd;131791
I have a set out of and 88 in wood grain really nice pieces. I will tell you it is from a non console car. I'll sell them to you cheap. The car is getting taken to the salvage yard any day.


I have a set here from a 87 or 88 cougar, but it was a non console, and the center (radio, ect) don't fit on a full console...

Thanks,

Dom.
[SIGPIC][/SIGPIC]1985 Thunderbird 3.8 carbed 57k original, summer car.
1980 Econoline inline 6 300ci 300k, winter/working.
1988 Base Bird finally crushed... RIP.

Dominique,  The Ridiculous, Fordus, crazyous!!!  :birdsmily:

Looking for a dash bezels.

Reply #6
Dom, im not sure but i dont think you cant get wood grain with a console. when the cars got the console option it automaticaly went to bushed alum.

Looking for a dash bezels.

Reply #7
1985-86 Cougar GS/LS or 1987-88 Cougar LS with the optional bucket seats/console...that's about the only way you're going to find that panel. Most people swap over to the brushed or butcher-block Thunderbird panels because they're a little easier to find. In all my years of dealing with boneyard cars (20 now...sheesh...) I've only found a handful of those panels, and they were broken so they stayed in the cars. Not an easy find at all.

Looking for a dash bezels.

Reply #8
Actualy there is a guy in the T-bird club by me that has a bone stock 25,000 mile 87 LX 5.0 with a floor shifter and console and sport seats (I know it's an LX because it has the badge and I checked the VIN). His dash and radio bezels are wood grain. I think that's the ONLY T-bird with a center console and wood grain that I've seen, well except for mine which isn't factory.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Looking for a dash bezels.

Reply #9
Heres a radio bezel.
http://cgi.ebay.com/ebaymotors/87-Ford-Thunderbird-center-dash-trim_W0QQitemZ180089531288QQihZ008QQcategoryZ40017QQrdZ1QQcmdZViewItem
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Looking for a dash bezels.

Reply #10
Are you still looking for them/If so,I'm going back out to the boneyard next week and I'll check for you.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

 

Looking for a dash bezels.

Reply #11
Hello Vinnie!,

Yes, for sure, BUT at reasonable price, A guy wanted to Me 60$ fot that, !!!!!!, I'll guess around 10-20$ not more...

And check for Your guizmo look like a fuel flow sensor Please!!! :-)))

Best regards,

Dom.


Quote from: vinnietbird;132065
Are you still looking for them/If so,I'm going back out to the boneyard next week and I'll check for you.
[SIGPIC][/SIGPIC]1985 Thunderbird 3.8 carbed 57k original, summer car.
1980 Econoline inline 6 300ci 300k, winter/working.
1988 Base Bird finally crushed... RIP.

Dominique,  The Ridiculous, Fordus, crazyous!!!  :birdsmily: