Print Page - T-5 Shifter?

Title: T-5 Shifter?
Post by: eazrider on March 20, 2006, 10:32:07 AM

I was modifying the stock shift handle (the part that actually bolts on to the tranny, and the attaches to) for a little more clearance relative to the console, and inadvertently cracked it. Does anyone have a stock shift "handle" for an '85 TC with a T-5? I am using a Hurst shifter. Any year 'Bird or Mustang lever will probably work, is there an aftermarket version I could use?

Title: T-5 Shifter?
Post by: Ether947 on March 20, 2006, 11:29:15 AM

dood! get an MGW shifter handle, it's like $30 and adjustable.
http://www.mgwltd.com/mustang_shift_handle.shtml

i have one, but i haven't installed it yet. if you still want the stock handle i will have one for you as soon as i swap it out.

Title: T-5 Shifter?
Post by: Red_LX on March 20, 2006, 01:38:14 PM

I'm guessing you don't have a welder?

I didn't like how hard the handle on my UPR shifter was to reach when the transmission was in 3rd or 5th, so I took a stock handle and cut & rewelded it. It was pretty decent although I ended up laying it back a little TOO far, so I think I'm gonna modify it a little again.

Title: T-5 Shifter?
Post by: shame302 on March 20, 2006, 08:02:51 PM

i hear that MGW shifter is the katsass with the T56. i realy want one. i have a pauls high performance one on it now. ill see how that feels but im almost positive im gonna get that MGW...

Fox T-Bird/Cougar Forums

Technical => Drivetrain Tech => Topic started by: eazrider on March 20, 2006, 10:32:07 AM