Print Page - engine computer question

Title: engine computer question
Post by: Master_xzavior on March 16, 2006, 06:04:54 AM

Can anyone tell me what the part number is for an engine computer to a 5.0L speed density SEFI setup?
Thanks
Dan

Title: engine computer question
Post by: SRBird on March 17, 2006, 01:04:31 AM

Look at http://www.fordfuelinjection.com under EEC program codes. You'll find the code #'s that show on the upper right hand corner of the computer harness connector. This page includes 5.0L SD computers for HO mustangs, Lincoln MkVII, TBirds, etc... Hope this helps.

Title: engine computer question
Post by: Master_xzavior on March 17, 2006, 02:52:22 AM

oh wow thanks that pretty much tells me what I need to knowas well as some other stuff I was wondering that Im not anymore

Title: engine computer question
Post by: Tbird232ci on March 17, 2006, 06:51:52 PM

You need one?

Title: engine computer question
Post by: Master_xzavior on March 18, 2006, 03:22:45 AM

I found one on ebay. That's what I needed the number for. Had to save the pic, enlarge it enormously, and then piece together the dots from being pixelated to come up with the number on the piece they were selling. But it turned out to be a computer for an 88 Tbird 5.0 speed density set up. Just what I needed to get it working.
Now if I can come up with a wiring harness I got it set. That's the last piece I need to complete my 5.0 transplant other then the exhaust which I may have worked out with another forum member.
I found the intake, throttle body, EGR spacer with valve in working condition, fuel rails with injectors and injector harness, a cold air intake,and the computer all for around 100 bucks. Not bad considering its the HO Intake, throttle body, and spacer.
That along with the E7 heads off the 302 out of the truck I ran across should beef the motor up descent I hope.
Hopefully soon I can post pics of my bird with a 5.0 in it, as well as maybe a few before after and during pics, since we've documented everything thats been changed so far.

Title: engine computer question
Post by: Tbird232ci on March 18, 2006, 09:21:26 AM

Find yourself an HO cam, and some 19% injectors, and i have an HO speed density EEC id sell ya relatively cheap.

Title: engine computer question
Post by: shame302 on March 18, 2006, 03:29:18 PM

ditto dude...wish i knew you needed all that. could have one stop shopped with me ;) i have all the HO stuff as well as all the factory tbird 5.0 SO stuff minus the harness.

Title: engine computer question
Post by: Master_xzavior on March 18, 2006, 06:42:25 PM

well thats just it I didn't actually need it all. I was actually just looking for a SD computer ran across all that other stuff for an HO and decided hell with it. I have the injectors already theyre on their way I just dont have the cam

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: Master_xzavior on March 16, 2006, 06:04:54 AM