Today, i took a trip over to see Motormenace, and he was getting rid of parts, stuff he couldnt use, couldnt make much money off of, but didnt want to throw away. So i came home with some good stuff.
For the TC:
(http://www.mustangevolution.com/gallery/data/541/medium/DCP_0890.JPG)
Complete turbo head. Just need to return the cam gear :(
(http://www.mustangevolution.com/gallery/data/541/medium/DCP_0892.JPG)
Valve cover, so i can paint, polish, and drill and tap for a nice breather/catch can setup without having to deal with having the cover off for a day or two.
(http://www.mustangevolution.com/gallery/data/541/medium/DCP_0895.JPG)
Engle 55 cam...
(http://www.mustangevolution.com/gallery/data/541/medium/DCP_0896.JPG)
...and followers
(http://www.mustangevolution.com/gallery/data/541/medium/DCP_0889.JPG)
Spare tranny k-member.
For the red bird:
(http://www.mustangevolution.com/gallery/data/542/medium/DCP_0888.JPG)
Mustang k-member.
(http://www.mustangevolution.com/gallery/data/542/medium/DCP_0891.JPG)
Tranny tunnel panel for the lower shift boot.
The plan is to have the head checked, big valves cut in, mildly ported, cam slid in there, pick up a log header for the time being, port an intake, and swap it all on in one shot. Should be fun.
sweet stuff. i wouldn't mind having that cam gear. :)
You about ready to swap the motor on the red bird yet?
Ive got a lot more to do before i swap motors. Decided to go all the way with some stuff, getting an A9L, going MAF, and strapping on some other goodies, so itll take more time than i antited, but the end result will be worth it
...bout time shawn.