Print Page - Wheel and rack ?

Title: Wheel and rack ?
Post by: CMQuickcoupe on February 23, 2006, 11:20:17 PM

Will a 03 cobra wheel that is 10.5 wide fit on the rear of an 84 with a sn95 disc brake rear or do I need to stay with the fox rear and will a 9in wheel fit up front.

Are the rack&pinions the same width as a fox mustang and do they use the same tierod ends.

Are the upper & lower control arms on the 84 turbocoupe the same as mustangs and are the front suspension components all the same k-member,A-arms.struts,etc.

Title: Wheel and rack ?
Post by: SLEEPER T-BIRD 87 on February 24, 2006, 01:08:14 AM

10.5" wheel will fit > s95 is the same width as the 86-88 t/c rear

the 9" wheel >will fit up front

Steering rack> I dont see why they wouldnt interchange.

control arms > some say 83-85.5 are the same as the mustang but i dont know

if you use a mustang k member you have to use the lower a-arms.
struts will interchange if you use stang spindles.

Title: Wheel and rack ?
Post by: CMQuickcoupe on February 25, 2006, 12:39:07 AM

Thanks SLeeperT-Bird 87

Fox T-Bird/Cougar Forums

Technical => Suspension/Steering => Topic started by: CMQuickcoupe on February 23, 2006, 11:20:17 PM