Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Swapping => Topic started by: billwrks on October 27, 2005, 11:27:50 PM

Title: help! out with the h0 in with 351
Post by: billwrks on October 27, 2005, 11:27:50 PM
i cant figure out some egnitiopn problems. How do i wire in a duraspark into my 84 couger! and my fuel is a problem too.
Title: help! out with the h0 in with 351
Post by: SLEEPER T-BIRD 87 on October 28, 2005, 01:04:20 PM
Quote from: billwrks
i cant figure out some egnitiopn problems. How do i wire in a duraspark into my 84 couger! and my fuel is a problem too.



carb? F.I ?  windsor/cleveland?
Title: help! out with the h0 in with 351
Post by: ButtSlappingPirate on November 01, 2005, 02:35:50 PM
All you really need to hook up to voltage, is the red or white wire from the duraspark ignition box(I can't remember, I have slept some since I last hooked one up)...the ignition box needs to be the "blue" unit (the color of the plastic wiring loom where the wires come out)...which came out on almost all of the pre-1980 duraspark II cars...
Title: help! out with the h0 in with 351
Post by: softtouch on November 14, 2005, 06:10:11 PM
(http://users.rcn.com/jroyle/Dura%20II.jpg)

Does this help?
Title: help! out with the h0 in with 351
Post by: SirChirpAlot on November 17, 2005, 09:38:49 AM
I hate ysparke just get a used MSD box 3 wires and go LOL

U need power ground and ign so it should not be that hard to do.
Title: help! out with the h0 in with 351
Post by: Lx-tasy on November 21, 2005, 11:11:30 PM
Holy cow, its been about 12 years since I have done that swap.Just use the above diagram and you will be fine.Its alot simplier then you think.
Text only | Text with Images