Print Page - seats in an 86 t-bird

Title: seats in an 86 t-bird
Post by: Unbreakable86 on August 25, 2005, 11:14:24 PM

I'm kinda new at this but how hard, if not a direct fit, would it be to put sn95 seats into an 86 t-bird thanx for any help.

Title: Re: seats in an 86 t-bird
Post by: Chuck W on August 25, 2005, 11:23:44 PM

Direct fit aside from the fact that the SN-95 seat controls were mounted on the front of the seats...so you'll be left with a small hole in the lower front portion of the seat. Mostly not seen.

They bolt right up to the Tbird seat tracks....

Title: Re: seats in an 86 t-bird
Post by: Unbreakable86 on August 25, 2005, 11:36:59 PM

so would I have to swap the track or do the sn95 seats bolt directly to the floor(like IO said I'm new to this) :sorry:

Title: Re: seats in an 86 t-bird
Post by: Chuck W on August 25, 2005, 11:50:31 PM

Like I said..swap the track.

The Mustang tracks will not bolt to the Tbird floor pan...

Title: Re: seats in an 86 t-bird
Post by: Unbreakable86 on August 26, 2005, 04:06:20 PM

Thanks alot for the help!

Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: Unbreakable86 on August 25, 2005, 11:14:24 PM