Fox T-Bird/Cougar Forums

Technical => Electrical Tech => Topic started by: Stevenmcm on February 10, 2019, 04:09:11 PM

Title: Cruise control not working
Post by: Stevenmcm on February 10, 2019, 04:09:11 PM
Can someone give me a place to start on the cruise control not working? Hit the cruise button and the set button and nothing happens at all. Thanks in advance
Title: Cruise control not working
Post by: Stevenmcm on February 10, 2019, 04:09:23 PM
1986 cougar
Title: Cruise control not working
Post by: Haystack on February 10, 2019, 06:27:44 PM
See if the horn works.

These cars predate clocksprings so there are contacts behind the steering wheel. If the car sits for a while they get corroded.
Title: Cruise control not working
Post by: jcassity on February 18, 2019, 10:59:59 AM
there is a cruise cable that goes from the throttle body over and into the driver fender well.
the end of the cable in the fender well at the cruise vacuum module has a tiny clip that holds the cable in place.

up at the throttle body, pull on the end of the cable...
if you ca pull it out and push it back in with easy, that tiny clip broke.

update us...
i am not really sure where to obtain a replacement clip but this cruise system did exist across many years of different application of cars.
Title: Cruise control not working
Post by: softtouch on February 18, 2019, 03:33:28 PM
If it is a Turbo Coupe with a manual trans, it could be the clutch switch.