Print Page - m90 Blower need a BOV ????

Title: m90 Blower need a BOV ????
Post by: ONEpissedOFFstang on July 25, 2005, 05:39:35 PM

I custom made a m90 on my carbed 5.0 , now should i use a Blow off valve or is there anything else i could use? Only asking this because i made a box to sit on my intake and the blower sits on that, now, if it back fires im worried ill blow the blower off the intake and thats why i want to know if i could use a bov with around 25-30psi to be safe... any suggestions would be greatly appreciated guys... Thanks

Title: Re: m90 Blower need a BOV ????
Post by: ONEpissedOFFstang on July 25, 2005, 08:47:33 PM

anyone ? im trying to tackle this as soon as possible... thanks again.

Title: Re: m90 Blower need a BOV ????
Post by: Tbird232ci on July 25, 2005, 11:59:46 PM

a BOV wont do anything if the engine backfires, thats not its job

i dont think a BOV will have much benefit on a supercharged car, especially with something like an M90

Title: Re: m90 Blower need a BOV ????
Post by: RTStabler51 on July 26, 2005, 12:46:40 AM

You may look at the Lightning/Cobra's boost bypass on the M112...

Title: Re: m90 Blower need a BOV ????
Post by: ONEpissedOFFstang on July 26, 2005, 10:21:08 AM

anything you guys can think off that would help other then looking at the lightning or cobra's setup.. even if they do have something it has to beable to go on a carbed 5.0 .... thanks for your help guys..

Title: Re: m90 Blower need a BOV ????
Post by: V8Demon on July 26, 2005, 10:28:22 AM

http://www.magnusonproducts.com/bypass.htm

Title: Re: m90 Blower need a BOV ????
Post by: ONEpissedOFFstang on July 26, 2005, 10:32:42 AM

thanks paul ... :)

Title: Re: m90 Blower need a BOV ????
Post by: cougarman on July 26, 2005, 11:42:14 AM

nice avatar!! :tg:

Title: Re: m90 Blower need a BOV ????
Post by: ONEpissedOFFstang on July 29, 2005, 09:49:12 AM

LOL , ty

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: ONEpissedOFFstang on July 25, 2005, 05:39:35 PM