Hey guys, I was looking at getting a Mach 1 chin spoiler for the TC front bumper on my Tbird. I was wondering if there are any installation issues to look out for, if there's a specific spoiler I should purchase or any other concern I may not be thinking of.
This is what I'm looking at
http://www.americanmuscle.com/mach1-chin-spoiler-9904.html
I got the same thing on Ebay a bit cheaper. Let it sit in the hot sun for a while, then jack the front of the car off, pull the wheels off, and have a drill and fasteners. I had to drill holes around the perimeter of the lower part of the bumper cover and spoiler and bolted it all together. Once it's on, trim the ends off with a Dremmel and cutoff wheel. There will be about 5 or 6 inches on each side that needs to be removed.
You can get them either straightened out or rolled up. Spend the extra 10 bux and get the straightened out one. The rolled up ones take a long.time to smooth out. They're actually much easier to install on a TC front end as opposed to a non TC one.