last needed parts...as far as I can tell
TV cable from column shift car.
non-Fox related (added 4/4/15)
I know a lot of you visit the yards, so I'll put this out there..
I'm looking for the inside plastic window shrouds (4 total) for the side, and rear cargo doors of my van.. 1992 Ford Econoline and up will work..
usually in club wagons, and conversion vans, color doesnt matter
thanks\
Jerry
Ill give you some 14#ers for shipping cost. I got plenty of 19#ers.
You still looking?
now I'm looking for a drivers side battery tray...but its not going to stop me from swapping to SEFI
Aren't they reversible?
Might have one in my 88 gt parts car. I'll check when I get home
Your, free. Just cover the shipping
I'll clean the schemegma out of it for ya
Dude everyone offers you free stuff, That's good.
thats awesome..... as long as you have a parts car.... I'm looking for a tv cable, and the bracket for the tv cable/ throttle cable thats on the T-body
I have a TV cable and bracket from my 91 LX. I'll dig the cable out and make sure it's still good to go. The car blew the trans, but I'm pretty sure that was because the TV was galled up inside the trans and wouldn't move with the cable. So I'll check that out, find the bracket, and if its good, arrange a meet with jandmmustangs since we have parts to exchange anyway.
thanks.... I appreciate everyones help with this project
We're good on the bracket. It and hardware are bagged ready to go. Unfortunately the stuck valve in the trans broke the plastic sleeve that holds the cable housing stationary. I can get the lock out of the cable adjuster if you want that as a spare.
Thank you,
and yes.... I'll take whatever is salvageable...
I'm going to do another check of parts I need on Monday... I'll post anything new that I might need in the afternoon.
Thanks everyone
as far as I can tell without ripping into anything....what I have listed on the 1st post is all I need for right now, along with the stuff I already have in transit, and items that I have already talked about with a couple people here in messages (you know who you are...lol)
Do you still need the air tube that goes between the throttle body and air box? I think I have one in the garage if you need it.
So far, it looks as though I'm going to need it... No big rush on that part
I'll check. If I have it I'll let it go cheap.
Jerry, if yours car is a column shift a TV cable from a console shift car won't work. Just a heads up.
Ford part #'s are as follows:
-- Column shift: E7SZ-7F042-A
-- Floor shift: E7ZZ-7F042-A
Aftermarket ones can be had for the floor shifter, but the column shift is a Salvage yard/NOS/Ebay/Cragislist kind of deal. I do wonder if one for an MN-12 would work.
Thread on it here: http://www.foxtbirdcougarforums.com/showthread.php?37241-NOS-TV-cables&highlight=tv+cable
E7TZ-7F042-A is apparently for 87-89 Broncos....might be worth looking into
isnt the way it connects to the transmission only difference? the one I got for my 87 had the bracket for the top mount, and the bottom mount.. I believe they pull in opposite directions
I wonder if theres enough slack to move mine to the other side of the engine compartment
I'm not entirely sure. I guess I should look at the mount point under the Lincoln and the Cougar and compare differences. I'll try to get pics.
the tv cable I got for my 87 was Lokar ...I believe this is the one I bought
http://www.jegs.com/i/Lokar/625/KD-2AODHT/10002/-1?CAWELAID=1710862879&CAGPSPN=pla&catargetid=230006180000848257&cadevice=c&gclid=Cj0KEQjwgI6pBRDak6aRovWNqLsBEiQA8zZSLtDAy2hpxMhZtssLD_uq-CK-Zufyo2OgEmGEdgBlKloaAlaT8P8HAQ (http://"http://www.jegs.com/i/Lokar/625/KD-2AODHT/10002/-1?CAWELAID=1710862879&CAGPSPN=pla&catargetid=230006180000848257&cadevice=c&gclid=Cj0KEQjwgI6pBRDak6aRovWNqLsBEiQA8zZSLtDAy2hpxMhZtssLD_uq-CK-Zufyo2OgEmGEdgBlKloaAlaT8P8HAQ")
believe thats why you flip the lever for a floor shift install
I can't remember if there are any other differences. Probably not though.
I was just thinking..... my parts bird was a column shift car..... I must still have that cable somewhere.... I remember looking at it, and saying to myself..."this wont work with a floor shifter... I believe it was to short.
I will have to hunt for it tomorrow and report back
did a bunch of searching for the tv cable....I dont think the parts bird had one. the AOD was swapped for a C6, and the column shift was swapped out for a B&M floor shifter.
The vert has the infamous kick down bar... The Lokar cable will probably be in my future
other then that.... the project will start when I receive the last of the parts that I talked about with a few members here
When I switched to a floor shifter, I made a bracket to change it to the opposite way to work. Then went to lokar. It was the best option, besides a T5.
parts needed update
You guys with column shifters will hate me but I bought the last NOS column shift TV cable in the country 5 years ago. It was at a dealer in Kansas sitting on the shelf. I paid a whole $59 for it.