Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on July 27, 2014, 04:02:21 PM
Post by: Lodemia on July 27, 2014, 04:02:21 PM
I've decided to go a different direction with my build and I've decided to put a trick flow top end on my 302. I have a beautiful, official ford racing GT40 intake (not an explorer lower) that has been powder coated metallic silver. I have also purchased a 1/2 spacer with gaskets and new hardware ($50). I paid $400 for the intake alone - someone will get a great deal. Bought it off corral here (corral.net) (http://"http://forums.corral.net/forums/windsor-engine-parts/1731602-gt40-tubular-intake.html")
Since I owe so much to this board and the wealth of information that's in the archives, I'm advertising here before I put it on corral or ebay.
How about a few pics?
More pics here... (http://"http://www.geofftrembley.com/Intake/")
PM me if you're interested -
Geoff
Since I owe so much to this board and the wealth of information that's in the archives, I'm advertising here before I put it on corral or ebay.
How about a few pics?
More pics here... (http://"http://www.geofftrembley.com/Intake/")
PM me if you're interested -
Geoff
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on July 31, 2014, 08:51:09 AM
Post by: Lodemia on July 31, 2014, 08:51:09 AM
Back to the top. Had some interest. To answer the questions:
1. No - I haven't run the intake, but it's an intake - what can go wrong?
2. I was planning a mild build, but I bought some heads that are heavily ported and they flow more than I can get out of this one, so I have to change direction.
3. The guy I bought it from said that one of the fuel line bolt holes will need to be tapped. I haven't done that.
4. This is the actual matching lower and upper, so I don't want to separate.
5. This has a tapped #5 runner, so we can run it on a fox without modification.
Hope this helps !
Geoff
1. No - I haven't run the intake, but it's an intake - what can go wrong?
2. I was planning a mild build, but I bought some heads that are heavily ported and they flow more than I can get out of this one, so I have to change direction.
3. The guy I bought it from said that one of the fuel line bolt holes will need to be tapped. I haven't done that.
4. This is the actual matching lower and upper, so I don't want to separate.
5. This has a tapped #5 runner, so we can run it on a fox without modification.
Hope this helps !
Geoff
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: thunderjet302 on July 31, 2014, 02:36:03 PM
Post by: thunderjet302 on July 31, 2014, 02:36:03 PM
I'd be all over this if I didn't have a wedding and honeymoon to pay for in two months. This wedding thing is killing my ability to pay for expensive car parts. All I can do is window shop :hick:
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on July 31, 2014, 02:55:22 PM
Post by: Lodemia on July 31, 2014, 02:55:22 PM
Put it on the wedding registry :D
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: vinnietbird on July 31, 2014, 03:04:05 PM
Post by: vinnietbird on July 31, 2014, 03:04:05 PM
PM sent
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: mcb82gt on July 31, 2014, 07:05:53 PM
Post by: mcb82gt on July 31, 2014, 07:05:53 PM
Looks nice, wish I had the money.
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: thunderjet302 on August 01, 2014, 01:14:59 AM
Post by: thunderjet302 on August 01, 2014, 01:14:59 AM
Quote from: Lodemia;436654
Put it on the wedding registry :D
Sure. I'll just replace some of that goofy china she wants. I'm sure she'll understand :hick:
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on August 01, 2014, 08:11:53 AM
Post by: Lodemia on August 01, 2014, 08:11:53 AM
It's shiny, and would look at home in a china cabinet.
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: My10-80 on August 01, 2014, 11:39:39 PM
Post by: My10-80 on August 01, 2014, 11:39:39 PM
Quote from: thunderjet302;436674
Sure. I'll just replace some of that goofy china she wants. I'm sure she'll understand :hick:
Maybe she wouldn't notice.
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: V8Demon on August 02, 2014, 01:48:33 PM
Post by: V8Demon on August 02, 2014, 01:48:33 PM
Price?
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on August 02, 2014, 11:53:47 PM
Post by: Lodemia on August 02, 2014, 11:53:47 PM
Quote from: V8Demon;436716
Price?
$400 + shipping
Title: Powdercoated GT40 Tubular Intake with spacer - $400
Post by: Lodemia on August 04, 2014, 08:38:20 AM
Post by: Lodemia on August 04, 2014, 08:38:20 AM
Sold to Driverguy & shipped out this morning. Thanks for all the interest!