Hey guys - I finally found a replacement for my 88 Tbird. She served me well over the years but rust has gotten the best of her. It was a HO conversion with a TC rear. I am keeping the drivetrain, but everything else is up for grabs within reason. If you are looking for a large part it will need to be picked up. I will be listing parts here in a few weeks after I get her apart, but if anyone has anything in particular they need, let me know. The car is a factory v8 with a mass air conversion. I have Chuck W motor mounts up for grabs. It has a factory console in it, as well as dash trim without the wood grain. It is a sunroof car, and the motor works on the sunroof. I can ship within reason. Let me know what you need and I will let you know if it is available.
The e brake set up is Turbo coupe and all the cables were replaced within the last few years. I replaced the hardware under the driver seat for that set up last year with a good donor because the old set up rusted out. The dash is full digital.
I also have a set of unused subframe connectors for the car for sale with the seat support. They were made by Kenny Brown - and are specific to the Tbirds and Cougars.
What color is the interior?
I am looking for a good sending unit from a digital dash car. If it is good shape I am interested.
These are the subframe connectors. The brand is Kenny Brown.
(http://i1226.photobucket.com/albums/ee411/8289ta/sfc1_zpse42a7c20.jpg) (http://s1226.photobucket.com/user/8289ta/media/sfc1_zpse42a7c20.jpg.html)
(http://i1226.photobucket.com/albums/ee411/8289ta/sfc2_zpseefbc.jpg) (http://s1226.photobucket.com/user/8289ta/media/sfc2_zpseefbc.jpg.html)
Interior is grey. Seats are shot. Door trim is decent. Let me know what you need I can get some pics.
Bodyman - what sending unit do you need?
Oops, fuel sending unit.
Bodyman, the fuel sending unit works fine. When I get the car apart I will snap a pic.
Does it have the metal trim on the rear window? I'm looking for the lower piece with no breaks, bends or cracks.
I think the trim around the rear window is rubber IIRC. I will take a look today.
Vinnie - I checked the window trim. It is rubber.
What do you want for the subframe connectors?
Also the pull cups on the drivers side door?
. Well, I do appreciate your time.
I was looking for $100 plus shipping on the SFC's
Which pull cups are you referring to?
Dibs on Taillights!?
Looking for the driver and passenger plastic seatbelt holder thing that attaches to the seat below the headrest to hold the seatbelt off your shoulder. Needs to fit 88 T-Bird preferable light blue in color - you can reply here or better email me at
marty.koch@forces.gc.ca
I can do Paypal
thanks
I have 2 good passenger side tail lights. The driver side is cracked. Headlights and front signal lights are good.
I think mine are in good shape but let me take a look first. They are gray though.
Cool. Did the car have power recline? If so is the plastic side trim on the seats un-cracked? If so I would be interested in the driver and passenger side front seat side trim.
How about the parts for a mass air conversion. Sensor, tubes, ecu (assuming a9p) Pm me with price.
I am using everything but the harness on my Mustang. If you are interested in the mass air harness, let me know.
Just an update on this. The car is off the road, engine and trans are pulled. I am taking off what I think are still good parts and junking it this week. If you guys need anything, let me know.
Parts that I am taking off in case you guys are interested - make offers.
Headlights - was an offer made on them
2 right side tail lights. left side is cracked
right side quarter glass
arm rests - both sides
console
trim for stick shift car - both mounting points are intact and no cracks on it
turbo coupe rear brake conversion stuff - cables, adjuster assembly under seat, etc. all in decent shape
silver dash trim - both pieces around gauges and console area
full digital dash gauge pod - all of it works
someone was interested in the fuel level sending unit - I will pull it if there is still interest in it.
power seat tracks - I have someone interested in those
Chuck W motor mounts for 5.0. New bushings needed, but otherwise solid. Chuck built a nice piece that held up to 8 years of abuse.
Like I said -anything else you guys need let me know. The car has to go so let me know soon.
I'm on Long Island and can pick stuff up. Got pictures of the seats? I'll take that sending unit if the other guy doesn't want it....
Yes, still looking for the fuel sending unit. Let me know how much shipped. Thanks
How much for the stick shift panel?
Pics of the the door panels please. Trying to figure out if they are the style Im looking for. The TC ones just dont hold up over time for some reason
Does the car have the Passenger side molding with the turn signal light option?
Are you talking about the cornering light in the fender? If so, yes it does. Do you need the molding or the lense?
I will get you a pic of the door panel. It has the TC style panels, but the insert is not cloth. The panels are not so great, but the arm rests are in good shape, as well as the map pockets.
Vinnie - how does 45 shipped sound on that trim piece for the shifter? I will get you a pic. The boot is still attached and in decent shape.
v8Demon - seats are shot. I have some good body parts that you might want. Passenger door is good. Both pieces of door glass are good.
I also have a set of Kenny Brown subframe connectors with seat supports that are pictured earlier in this thread that I can make you a good deal on if you pick up.
Bodyman - how is 60 shipped, including a high volume walbro pump?
Sounds good, pm paypal info and I will get you paid. Thanks - Joe
Joe - I am back at work on Tuesday. Let me drop the tank, and get you a pic, and then you can send payment. It worked fine and was accurate, but just want to you to see what you are buying first.
I have those same connectors already. They're awesome. Full console car or consolette?
It was a consollette car originally, but I cut it off and added a full console.
Never mind on the door panels then, If I have to go thru dyeing and such I want the other style. I know the panels I'm looking for were the same ones my old 88 sport had.
Joe - I sent you a pic of the sender
Vinnie - a few pics of the shifter plate. It is in nice shape.
(http://i1226.photobucket.com/albums/ee411/8289ta/tbird3_zpsff3d79a0.jpg) (http://s1226.photobucket.com/user/8289ta/media/tbird3_zpsff3d79a0.jpg.html)
(http://i1226.photobucket.com/albums/ee411/8289ta/tbird5_zps0f08e721.jpg) (http://s1226.photobucket.com/user/8289ta/media/tbird5_zps0f08e721.jpg.html)
PM sent :)
Interested in subframes, you still have them?
Thanks,
Chris
Still have the subframe connectors. Sent you a pm.
Still have the front seat belt buckles (receivers/receptacles)?
I have them but the plastic covers are shot. The buckles and webbing are in good shape.
What would you have to have for them?
I sent you a pm
still have the right side tailights? if so pics and price?
I do. I will get you a few pics today.
Just letting you guys know - I will be at fall Englishtown swap meet and I will be bringing what I have left. The swap meet is this weekend Sept. 26th to the 28th.
I have left:
passenger side seat track
Chuck W motor mounts
headlights
passenger side tail light
AOD trans removed from 1990 Mustang
3.27 rear removed from same Stang
AOD torque converter
AOD flywheel
manual trans shifter trim
alternator
starter
air pump
factory HO headers
BBK headers - ceramic coated. Used, some rust. These fit a Fox TBird without moification
MAC headers - like new, did not fit Tbird, and were removed after a short time due to issues with the steering shaft
55 mm factory mass air sensor
HO throttle body
Mustang Pony rims painted black. Tires are almost new.
Come check out the stuff. I need it gone so make offers
PM sent regarding parts.
Bill - pm replied.
Oh - BTW - I also have a nice turbocoupe steering wheel and horn button and I will be bringing that to the swap meet as well.
BBK headers gone. I still have the rest of the parts listed.
What wheels does it have? I am looking for the center caps for the aluminum 14" rims.
Wheels and car are gone.
I only have a few parts left.
If you still have the sfc I will take them.
Sorry sfc's are gone