Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Electrical Tech => Topic started by: buickv6 on April 13, 2014, 12:21:14 PM

Title: help with my signal light wiring
Post by: buickv6 on April 13, 2014, 12:21:14 PM
I have an 88 sport and all my vehicle hazards and signals work except for the right front, it only works as a park light. Which wire from the socket is for this non working filament and where does it go? there must be a point where the front and rear connect where I can check? oh and yes the bulb is good.

Thanks,
Shane
Title: help with my signal light wiring
Post by: softtouch on April 13, 2014, 03:44:25 PM
From the 88 EVTM:
It is the White/Light Blue wire. This same circuit powers the RH Turn Indicator on the dash. If the Indicator works the Multi-function Switch is good.
The W/LB wire goes through an 8 terminal gray connector C232 on the front side of the LH shock tower.

The Multi-Function Switch (Turn signal & hazard switches)  Has different switch contacts for front and rear.
Title: help with my signal light wiring
Post by: buickv6 on April 13, 2014, 06:47:00 PM
Quote from: softtouch;432283
From the 88 EVTM:
It is the White/Light Blue wire. This same circuit powers the RH Turn Indicator on the dash. If the Indicator works the Multi-function Switch is good.
The W/LB wire goes through an 8 terminal gray connector C232 on the front side of the LH shock tower.

The Multi-Function Switch (Turn signal & hazard switches)  Has different switch contacts for front and rear.

thanks, my indicator in the cluster does function. I will find this connector and check there for power
Title: help with my signal light wiring
Post by: buickv6 on April 14, 2014, 07:09:38 PM
turns out the problem was a pin broke in the connector C232 you suggested, thanks again
Text only | Text with Images