88 tbird sport
5.0 ho conversion with an 86 speed density HO MKvII computer & explorer parts.
pulled codes
using the check engine light
initial blinks are :
on.....
pause 3 sec
on....
pause 3 sec
on....
pause **about 8 sec
on
pause 3 sec
then codes dump which are 53, 63 and 31
I know not too long ago my son had a defective green wire connection to the TPS and i repaired that.
I am wondering if the 53 and 63 codes will go away.
with TB at rest, i have .86vdc and at wot, i have about 4.6vdc
anyway, the question i have is ,,, Whats up with all the single initial pulses?
I am use to codes dumping out in two groups,,
the instantanious codes and then followed by the memory codes.
i did not get two groups of codes , just one group.