Print Page - ISO t-5 fork and spacer

Title: ISO t-5 fork and spacer
Post by: BEARMAX on September 03, 2013, 11:34:21 PM

need the clutch fork and spacer between eng-trans 5.8 t-5

Title: ISO t-5 fork and spacer
Post by: BEARMAX on September 03, 2013, 11:40:21 PM

also need 87-88 xr-7 buttstuffog cluster I have the tc one but I dnt want the turbo gauge

Title: ISO t-5 fork and spacer
Post by: hcor on September 05, 2013, 10:17:41 PM

I have the block plate pm me your zip and ill check shipping, make an offer on it

Title: ISO t-5 fork and spacer
Post by: Haystack on September 06, 2013, 12:18:06 AM

if you have a 351 bell then it will be a 164 tooth flywheel. the 94-04 v-6 should be a direct swap for the spacer. bell is similar for the v-6, but needs a longer input shaft.

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars WANTED => Topic started by: BEARMAX on September 03, 2013, 11:34:21 PM