I couldn't find the orig thread, but was a talk of sanding and putting the varnish on headlights, well here is a before and after
(http://i48.tinypic.com/2qxucro.jpg)
(http://i47.tinypic.com/2lxw13o.jpg)
And my car has been sitting outside for about 6 months since and is still that clear.
awsome ,,
all in my diy link below but here is the thread
headlamp rework and remirror the insides, clear coat the outter lense
http://www.foxtbirdcougarforums.com/...ior&highlight=
and the results
results of my headlamp modification
http://www.foxtbirdcougarforums.com/...ion&highlight=
and a buncha other light stuff and goodies
Relay adds to remove heat from headlamp and ignition switch
http://www.foxtbirdcougarforums.com/...d-Marker-lamps
results of my headlamp modification
http://www.foxtbirdcougarforums.com/...ion&highlight=
HIGH BEAM *with * low beams on modification ~just an easy jumper wire. ((applicable to those with auto lamps only))
http://www.foxtbirdcougarforums.com/...054#post408054
headlamp rework and remirror the insides, clear coat the outter lense
http://www.foxtbirdcougarforums.com/...ior&highlight=
headlamp resources
cougs & bird headlamps match up with 89>94 linc continental, per Vinnie- he doesnt see linc headlamps as dull as coug or birds
Headlamp HID stuff > thanks THEFOEYOUKNOW
http://www.theretrofitsource.com/pro...roducts_id=227
http://www.jcwhitney.com/headlight-c...2824j1s17.jcwx
HID mod> Thanks TbirdX3
http://www.foxtbirdcougarforums.com/...%29&highlight=
Convert your not so accurate amp meter to a volt meter easily
http://www.foxtbirdcougarforums.com/...&daysprune=100
Cool down that big resistor on the back of your buttstuffog instrument cluster.
This also applies to those with digital clusters except the resistor is smaller.
http://www.foxtbirdcougarforums.com/...&daysprune=100