As the title says, I need a coil plug and pigtail in great shape. A few inches of wire.
Let me check and see if the 2.3 Mustang stuff is the same as our 5.0 cars. I pulled the engine harness from that Stang last fall, it's useless to me, other than instances like this. If it's usable, its yours. Hang tight!
Vinnie, I struck out...I must have gotten rid of the 2.3 harness. I looked in all the places I have stuff, but it's not anywhere...sorry dude, I will keep my eyes open though.
Thanks. I may just buy a new one. I saw one on Ebay the other day. I appreciate you looking.
Hey Vinnie, If im thinking about the right connector, worse case, you should be able to buy a MSD IGN coil connector kit and use just the one end.
I'll check into that. Thanks a lot.
No problem, your welcome.
I got one off the v-6 harness, it's the same. If you can wait till Tuesday I'll send it out to you.
I have one. Lmk you can have it
I have one too. Let us know
Kitz first. Yes Kitz, I can wit. No worries. I owe you two.
I'll send it Tuesday. You want the V-6 to it will bolt right in!!
Give me another week to think about the V-6. I may ditch the 5.0 and just do it.
I should put that v6 in my franken-blower
(http://i233.photobucket.com/albums/ee79/daminc/IMG_1794_zps6bced962.jpg)
With zoomie pipes out the side.
Readily available in the aftermarket or the FORD STORE!!!
http://www.repairconnector.com/products/Ford-Ignition-Coil-Connector-Harness.html
I saw that. Kitz is fixing me up. Thanks guys.
I can deliver!!!,Vinnie went out today, forgot to cut it off yesterday.
Get some steel and a plan,Me and mike will come and install it for you, You figure the wiring out.
Thanks Kitz. No hurry. I appreciate you. If you need anything, let me know.