Finally found a tilt column to fit my car but had to go through the back of the dash to get every wire and connector to make sure I had everything. Took all of the trim and cluster out in one piece for the next guy to come along.;)
was that woodgrain dash in good shape?
Are you looking for one Jerry?
Dash was perfect, that is why I took it out in one piece. It also had the digital cluster in it, if you look to right in the second pic its on the seat. This car even had the ignition key that is why I messed with it.
Can you grab the front license plate holder, please?
If the car is there when I go back saturday I'll grab it if it is still there.
You should grab the dash as well. An uncracked dash is REALLY hard to find these days.
Looking at the first pic..that dash looks shaged up to me. Just below and to the left of where the column was is bent the hell out.
Any chance you could grab the grille?
@ThunderbirdSport302. The plastic dash came out in one piece. The parts that are bent back are metal frames that held the trim. I was chasing wires most people would not be as delicate.
one of mine is faded near the drivers window
also looking for the center woodgrain part too...for a center console car
With those four screws please.
Thanks :)