Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: jcassity on November 09, 2012, 06:57:52 PM

Title: Armrest repair
Post by: jcassity on November 09, 2012, 06:57:52 PM
For this armrest the shown little clip you used to Clamp back wiring is a good solution to fix broken tabs on the armrest/pocket

Just  two part epoxy and gently crimp with vice grips and let it dry
Title: Armrest repair
Post by: thunderjet302 on November 09, 2012, 11:01:26 PM
Hmm neat idea. Did you use JB Weld?
Title: Armrest repair
Post by: jcassity on November 10, 2012, 01:36:41 AM
you lost me?
not sure what you are asking
Title: Armrest repair
Post by: thunderjet302 on November 10, 2012, 11:31:19 AM
Quote from: jcassity;402268
you lost me?
not sure what you are asking


The expoxy you used. Was it JB weld?
Title: Armrest repair
Post by: jcassity on November 10, 2012, 12:22:05 PM
no, its just regular 5min epoxy in a seringe, clear.

going out to work on the other door lock solenoids now and make misc panel repairs as a go
Text only | Text with Images