Text only | Text with Images

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars FOR SALE => Topic started by: chrome302jr on October 12, 2012, 09:18:46 PM

Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 12, 2012, 09:18:46 PM
Made the decision to sell the T-bird, time to move on to other projects.
Car located in South-east Virginia.
History of the car:
I purchased the car from the original owner in 1999, up until that point it was garaged. Was originally a V6 car, I performed the 5.0 HO / TC Rear End swap in 2001. Drove the car until around 2008 when I parked it. Recently pulled the motor/trans to part out. Currently the car has everything aside from motor, trans, driveshaft and wheels. The body is fairly straight, no rust or damage. It's been a VA car it's entire life, no real snow down here.

Beside all the stock components, the car has:
Ford Motorsports M-5300-E Springs (Front/Rear)
Maximum Motorsports Caster/Camber plates
3.73 Turbo Coupe Rear End with drum brakes (Trac-Lock Rebuilt)
Turbo Coupe Header Panel
Lincoln LSC H-Pipe
V-8 wiring harness
B&M Hammer Shifter

Exterior:
Silver paint is original. All body panels are straight, with minimal dings, no rust. All lights, glass and trim. Does need a new front windshield.

Interior:
Original red/maroon interior in good condition. Have original seats.

I'm open to offers on the car. Ultimately, I'd like to see it go to a good home and not the s yard. I do have a clear title on the car.

I can answer any questions, I know the car pretty well by now. :D

Thanks guys,

Ronnie

Pics: Note the rims and engine are not with the car any longer. If you are interested in the car, we will need to arrange wheels to load on trailer.

(http://i13.photobucket.com/albums/a280/chrome302jr/DSC04057.jpg)

(http://i13.photobucket.com/albums/a280/chrome302jr/DSC04058.jpg)

(http://i13.photobucket.com/albums/a280/chrome302jr/DSC04056.jpg)

(http://i13.photobucket.com/albums/a280/chrome302jr/DSC04044.jpg)
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 86T-bird on October 12, 2012, 09:59:31 PM
Location?
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 12, 2012, 10:53:43 PM
Car is located in South-east Virginia.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: poppop on October 13, 2012, 08:31:00 AM
How much you looking for?South- east Va. is a big area.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 13, 2012, 09:03:33 AM
Quote from: poppop;400382
How much you looking for?South- east Va. is a big area.

I'm in the Suffolk/Smithfield area of Hampton Roads.

As for price, I'd like to get $750, but I'm open to offers. As I mentioned before, the car will need wheels to load onto a trailer.

Also have 5.0 fuel injection induction parts for sale that if the buyer needs we can work out.
Explorer Upper/Lower Intake Manifold $150
Pro-M 75mm Mass Air Meter for 24lb injectors $110
Ford Mass Air Computer (Have two, both A9P & A9L)
Mass Air Harness back to Computer
BBK 70mm Throttle Body and EGR Spacer $115
Moroso Cold Air Fender Kit w/cone filter $40
Stock Air Box $25
Aeromotive Rail Mount Fuel Pressure Regulator (p#13103) $75
Flowtech 1 5/8 Shorty Headers (Unequal Length) $75
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: thundr306 on October 13, 2012, 08:04:43 PM
Oh man...got me thinking.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: daminc on October 13, 2012, 08:16:03 PM
Quote from: thundr306;400402
Oh man...got me thinking.

I was hoping you saw that.....
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: vinnietbird on October 13, 2012, 10:15:40 PM
How much for the computers?
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 88turbo on October 14, 2012, 03:23:00 PM
yeah, computers.......  How much?

also the mass air wiring?
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: Beau on October 14, 2012, 04:18:43 PM
If you were closer I'd take it..
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 14, 2012, 09:58:33 PM
Quote from: vinnietbird;400415
How much for the computers?

$150+shipping for both computers and mass air harness.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 88turbo on October 14, 2012, 10:37:51 PM
will you sell one computer with the harness? or what is the price for each one? thanks
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 15, 2012, 09:24:00 AM
I'd go $100 for the computer and harness plus shipping.

I'm open to offers on the car guys, I know this would make a great project car or worst case a parts car.

Thanks,

Ronnie
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 88turbo on October 15, 2012, 10:10:36 AM
Hang on to the A9L and mass air harness for me please, I should have cash this weekend.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 1BadBird on October 15, 2012, 05:27:53 PM
I'd come n get the car but........ It would cost me more in gas than what I'd be paying for the car. :hick:
But it looks like a nice roller:D
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: thunderjet302 on October 15, 2012, 06:48:24 PM
Quote from: 1BadBird;400509
I'd come n get the car but........ It would cost me more in gas than what I'd be paying for the car. :hick:
But it looks like a nice roller:D

 
I was thinking the same thing :hick:.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 15, 2012, 07:59:21 PM
I have a car hauler, I'm not opposed to meeting up at a half-way point to make this happen. I'd need to find some temporary wheels to get it on the trailer. :)
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: thunderjet302 on October 16, 2012, 12:22:22 AM
I have no truck or car hauling trailer and no access to one otherwise I'd be really tempted.
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: 88turbo on October 16, 2012, 06:26:05 PM
How much for shipping on the A9L and mass air harness to 67005? Thanks
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: Sick88Tbird on October 19, 2012, 08:44:20 PM
If I didn't just buy a ranger for a 302 swap, I'd be all about this...I'm guessing it doesn't have the Sport interior with the good buckets and full center console?

Good luck with the sale,
Don
Title: 1988 T-Bird Roller with TC Rear End - No Rust
Post by: chrome302jr on October 23, 2012, 08:34:12 AM
Quick update guys, the car will be headed out of here within the week. If you have any parts requests let me know. Here is what I have left from the car:

Ford Motorsports M-5300-E Lowering Springs (Front/Rear)
Maximum Motorsports Caster/Camber plates
3.73 Turbo Coupe Rear End with drum brakes (Trac-Lock Rebuilt)
Lincoln LSC H-Pipe
Custom Catback with Dynomax lers
Interior
V-8 wiring harness

Send me any other requests.
Text only | Text with Images