[SIZE="6"]Deadline for parts request is Sept 30th[/SIZE]
Alright. I am deciding to part with my cougars and all my cougar parts stash. Impending lay off coming soon and just need to get some money and instead of just sping this car out, I would like to offer the members here a chance to get any parts they may need (including repair panels)
So the vehicle is an 86 Cougar with 302/Aod I have not decided if I will part with the motor.
the trans works good and also has a 7.5" 3.27 traction lok differential with 10" brakes (could use new hardware and drums)
Pictures of the car are here
http://s1152.photobucket.com/albums/p498/the_intimidator03/Cougar%20Part%20Out/
I also have other random goodies and other things to unearth from my shop.
I am very reasonable on prices. I will list a few up. Along with some parts that I have somewhere.
All prices are OBO and Plus Shipping
Manual seat racks (1 driver side and 2 passenger available) $20 *Drivers Side spoken for*
15:1 Steering rack (needs cleaned up, Never got around to installing) $20
Front and Rear Turbocoupe Swaybars $30 for the set or $20 each
Turbocoupe hood (rust on front lip as can be seen in pictures) $30
85-86 Cougar Taillights (1 Driver side 2 Passenger decent to ok shape) $10 each.
Factory Mustang shorty headers *sold*
Feel free to ask if I have any other parts. I will check this daily and respond as soon as I can
I do have several Base instrument clusters and gear indicator rings with cable that can be bought whole or pieces.
All parts are located in Winchester, Oregon 97495 and can be shipped by Fedex, UPS, Postal
Some new found parts****
blue visors from 86 cougar
pair of power mirrors 83-86
pair of power mirrors 87-88
Coolant reservoir/bracket from 88 v6 car (i think)
Premium Sound AM/FM stereo (worked when pulled)
Also if people need "patch" panels cut please let me know as they can be cut to size for you folks
How much for the headers shipped?
I'm not registered... can't see anything
Daminc you should be able to view pictures now with the photobucket link.
Vinnietbird I will have a quote for you this afternoon. The headers have 3 studs on them total (not sure if its suppose to have 4, just thought i would let you know) I will also get you a picture of them as well.
manual driver side seat track? Dibbs.
what would shipping to 46818 be?
i need the metal or plastic shield above the cowl where the wipers park if yours is in good shape and are you lower plastic seat belt sleeves, the ones by the door sills intact? thanks, David
Ill get you a picture of the windshield peice and im plagued by the same issues most people are... oh wait by the door itself.. Ill take some pics of that as well. Ill get em up tomorrow after work.
87thunderbirdblackjack Ill get a shippin quote in the next day or so. I usually get off around 4 so its a rush getting to post office.
No big deal bud. I work 3rds so in know the rusharound quite well. Thanks for getting back with me.
ooh, what condition is the stereo trim in? I've been looking for woodgrain trim for ages! also, the little coin tray thats in place of the floor shifter, are the mounting tabs intact? mine are all broken off.
the current one picture in the car along with all center console components are spoken for but I am heading to the shop and I do know I have at least another woodgrain trim and another "coin tray" that I can get pictures for you.. its not as nice tho
okay, just send me some pics if you could, see if they're in nicer shape than mine
Bump. Deadline for parts request is added and also found a Premium Sound AM/FM stereo that worked when pulled.
Driverguy There is another coin tray I found and pictures are in the same link
Figure one last bump before the car gets loaded up
any chance i could get the 4 bolts that hold on the front control arms? mine are seized on...probably going to have to cut them off. I have an 88, but are the bolts the same length?
well once I get the motor pulled I can yank the control arm bolts for ya (may be a week or two as I have a few things going on trying to make some money before lay-off's)
I can only assume the bolts would be the same length
alright, it'd be greatly appreciated...also, the retainer clip for the trunk lock cylinder...that might be the same as mine as well, iI' not sure though. could you grab that before it goes to s?
I can see if I can yank it without breaking it
I am tapped out this week but if you save those tail lights I will buy them in 2 weeks .