Print Page - Temp probe question

Title: Temp probe question
Post by: 88 Blackbird 5.0 on December 13, 2011, 07:31:36 PM

I'm gonna be installing a Delta Current Control fan controller on one of my Birds. The car's thermostat housing has a bung that can be drilled and tapped. I want to drill and tap it, so I can install a temperature probe in the T-stat housing. Does anyone know what size hole and what the thread pitch should be to allow one of DCC's temp probes to thread in?

Title: Temp probe question
Post by: flylear45 on December 13, 2011, 09:23:42 PM

I used Dakota Digital and it took 3/8-18 NPT.

http://www.foxtbirdcougarforums.com/showthread.php?24179-1988-TC-single-Holset-turbo-5.0-4R70W/page8

Title: Temp probe question
Post by: 88 Blackbird 5.0 on December 15, 2011, 12:33:28 PM

3/8-18 NPT huh? Thanks!

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: 88 Blackbird 5.0 on December 13, 2011, 07:31:36 PM