Print Page - Throwout Bearing Arm

Title: Throwout Bearing Arm
Post by: Superbird88 on October 04, 2011, 07:37:28 AM

I'm installing the T5 that was in a TC in my sport coupe however the Turbo Coupes have hydraulic clutches and I need a cable clutch for the 5.0. I ordered a bell housing from Ebay for the 5.0 however it did not come with a throwout bearing arm. Can I use the throwout bearing from the TC (hydraulic clutch) or are the throwout bearing arms different for the different types of clutches?

Title: Throwout Bearing Arm
Post by: TOM Renzo on October 04, 2011, 12:30:20 PM

They

Title: Throwout Bearing Arm
Post by: The Shredder on October 04, 2011, 05:18:55 PM

The 5.0 does use a different clutch fork setup and pedal assembly.

Superbird88, I'm interested in your TC hydraulic setup if you would be willing to sell it.

Title: Throwout Bearing Arm
Post by: Superbird88 on October 06, 2011, 08:56:08 PM

The Shredder, I'll organize what I have of the TC hydraulic set up and take some pics for you. I think I have everything and its in tact. (Bell Housing - with Throwout Bearing Arm, Dust Shield, Clutch Plate, Pressure Plate, Pedal Assembly, Slave Cylinder and Master Cylinder). The T5 is the only thing I'm keeping from the TC.

Title: Throwout Bearing Arm
Post by: Aerocoupe on October 10, 2011, 10:08:33 PM

Correct me if I am wrong here but I believe a cluch/brake pedal setup out of a 4 cylinder or 5.0 85-93 Mustang will work for you. Do a search but I am pretty sure it will.

Darren

Fox T-Bird/Cougar Forums

Technical => Drivetrain Tech => Topic started by: Superbird88 on October 04, 2011, 07:37:28 AM