Text only | Text with Images

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars WANTED => Topic started by: CougarSE on May 25, 2005, 10:27:26 PM

Title: 87-88 motor mounts needed!!!
Post by: CougarSE on May 25, 2005, 10:27:26 PM
Please!  :bowdown:
Title: Re: 87-88 motor mounts needed!!!
Post by: ipsd on May 26, 2005, 08:54:37 AM
Is that a 5.0 or the 3.9?
Title: Re: 87-88 motor mounts needed!!!
Post by: Blown306Cougar on May 26, 2005, 11:13:22 AM
umm? how about an auto parts store..

napa, auto zone, pep boys, local B&J auto parts or whatever names they call them by you. ;)  the popular aftermarket peices are anchor.. and the part number is 2661 for both left and right sides for V8 & V6.. and in napa are "balkamp" part munber 6021649 napa allso has a L"cheapo part number too and that is balkamp 6121649..

have a nice day


Nick
Title: Re: 87-88 motor mounts needed!!!
Post by: 87 3.8 CAT on May 26, 2005, 11:30:23 PM
NAPA was around 30$, don't remember exactly. Just replaced mine a couple weeks ago...
Title: Re: 87-88 motor mounts needed!!!
Post by: cougarman on May 27, 2005, 07:37:04 AM
Guys, he needs the brackets that bolt to the engine, not the rubber donuts they sell at the auto parts. :D
Title: Re: 87-88 motor mounts needed!!!
Post by: Beau on May 27, 2005, 07:06:51 PM
probably have to go to a junkyard and see if they have any, or swap in a 'Stang k member like I am gonna do...
Title: Re: 87-88 motor mounts needed!!!
Post by: black ct on May 28, 2005, 02:03:11 AM
Try the dealer.  That's where I got mine.
Title: Re: 87-88 motor mounts needed!!!
Post by: Beau on June 01, 2005, 02:21:01 PM
The bracket is discontinued, I've called about 4 diff. dealerships around, 2 of em didn't even have a clue what I was talkin' about...
Title: Re: 87-88 motor mounts needed!!!
Post by: honkeyboss on June 01, 2005, 07:20:03 PM
I've got a set I just pulled. The rubber is pretty tired, but the brackets are fine. They're out of an '87 XR7 5.0L. Make me an offer.
Title: Re: 87-88 motor mounts needed!!!
Post by: cougarman on June 06, 2005, 01:31:12 PM
i have a couple sets of them make me an offer, thanks
Title: Re: 87-88 motor mounts needed!!!
Post by: CougarSE on June 06, 2005, 05:54:08 PM
Sorry I havn't responded in a while.  I dont know how much they are worth.  How bout 20 bucks?
Title: Re: 87-88 motor mounts needed!!!
Post by: Beau on June 06, 2005, 10:04:27 PM
I'm interested in a set myself, as I'm looking at either getting a 'Stang k member, or buying a complete SO 5.0 out of an '88 Sport...
I dunno what a decent price for em would be, myself...I'd say that I'd pay up to 50 bucks for a set...
Title: Re: 87-88 motor mounts needed!!!
Post by: honkeyboss on June 07, 2005, 10:30:03 AM
I just remembered that I did a little grinding on the passenger side bracket so that mustang headers would clear. I basically cut the anti-roll strap off. Unless you're pumping out a ton of power, you don't need it anyway. I was probably at around 275 HP and never noticed anything. If you are looking to build a high performance car without changing to a mustang K-member, I would suggest pulling the rubber out of the mount and replacing it with a steel slug so you have no movement at all.
      $20 plus shipping sounds good if you're still interested. You can email me at tim.roberts@us.army.mil
Title: Re: 87-88 motor mounts needed!!!
Post by: honkeyboss on June 07, 2005, 10:31:27 AM
By the way, I'll clean them before I ship them. That oil will probably soak right through the box.
Title: Re: 87-88 motor mounts needed!!!
Post by: srv1 on June 07, 2005, 08:34:24 PM
Quote from: honkeyboss
I just remembered that I did a little grinding on the passenger side bracket so that mustang headers would clear. I basically cut the anti-roll strap off. Unless you're pumping out a ton of power, you don't need it anyway. I was probably at around 275 HP and never noticed anything. If you are looking to build a high performance car without changing to a mustang K-member, I would suggest pulling the rubber out of the mount and replacing it with a steel slug so you have no movement at all.
      $20 plus shipping sounds good if you're still interested. You can email me at tim.roberts@us.army.mil


Hmmmmmm... I have a set that is going into my conversion. How many people would be interested in them if I could make them? Just the bracket that bolts to the motor not the mount.

James
Title: Re: 87-88 motor mounts needed!!!
Post by: CougarSE on June 08, 2005, 03:21:25 PM
email sent honkey
Title: Re: 87-88 motor mounts needed!!!
Post by: Beau on June 08, 2005, 08:47:22 PM
Quote from: srv1
Hmmmmmm... I have a set that is going into my conversion. How many people would be interested in them if I could make them? Just the bracket that bolts to the motor not the mount.


I'd be interested in a set, if you can make 'em...I'm sure I ain't the only one either...
Let us know on a price, and availability...
Title: Re: 87-88 motor mounts needed!!!
Post by: srv1 on June 09, 2005, 07:34:02 PM
Let me dig my set out and see what I'am up against.

James
Text only | Text with Images