NOS Turbo Coupe 5 speed shift with "TURBO" embossed on it.....price to be announced
Tripminder...excellent shape....$40.00 shipped
Fox Mustang 5.0 steering pump bracket for a/c delete.....$35.00 shipped
A/C evaporator....$40.00
Antenna/Ride control/Fuel switch assembly for Turbo Coupe....Very nice shape....$25.00 shipped
5.0 Thunderbird/Cougar motor mounts....$45.00 shipped for the pair
5.0 fuel rail........$25.00 shipped.
8-19# injectors.....$25.00 shipped (I have 2 sets)
Stock clocks.....$10.00 shipped each.
Rubber distributor boots....$12.00 each shipped (I have 5 or 6).
Two dead pedals....$12.00 shipped each.
Console cubby for a column shifted car with a console....$20.00 shipped
Console control panel vinyl graphics o restore it. All letters in white for seats and windows. One sheet can do a dual power seat panel or a single....$8.00 shipped....2 for $12.00
TC hood air duct....Not the hood....just the air duct...$15.00 plus actual shipping.
TC steering wheel...no horn button....$30.00 shipped
New crate engine valve covers. Gray steel, will fit over roller rockers, I installed "302 High performance" stickers....$30.00 shipped
Console brackets.......$18.00 shipped for each pair ( 3 sets)
More to come.........
They'll fit a 5.0 or 351W that use pedestal mount rockers. I can ship same day or next day after payment is made depending on the time the payment is made. I do have PayPal.
Let's get these to a new owner.
great price.
Lowered the price. Can't go lower.
Up again.
Rockers sold !!! Thanks. Bumpage for the rest.
More added.
PM's answered, list updated. If you need something, I'm easy to deal with.
More added
What kind of shape are the motor mounts in?
Very good shape. The actual metal pieces are in excellent shape, and the cushions are new.
ok I have a set of "custom" stock mounts and my headers are hitting the steering shaft. I think stock ones would make it clear. i'll let you know Vinnie. thanks
No worries. The mounts have new cushions installed, but the new cushions haven't been installed on a car.
vinnietbird,
Pictures available on the quad shocks?
Also, are all years the same?
And, if not, will these definitely work on
my '85 TC?
On the NATO website your list includes a
set of TC center caps for $20 shipped.
Could you get me some pictures of these also?
Thanks!
Jeff Parker
Columbus, Ohio
Jeff, I'll get pics asap for you. You can trust me when I say I only will send very good parts. Nothing bad at all. Ask anyone here. The quads are in excellent shape,including the strut shields on them. Bushings also look great. The 4 caps are ready to pop on the TC snowflake wheels, or ten hole wheels.
Vinnie, do you have pics of the TC Scoops and Tailights? I'm very interested.
I'll get some posted as soon as possible.
Hey vinnie is that top and bottom on the 5.0 mounts?
That's the top,middle, and bottom. The whole assembly.
Here's the pic....
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF3004.jpg)
There a couple of minor dings in a cap, so $45.00 shipped for the caps and quads.
vinnietbird,
I'm going to pass. I really don't NEED the
center caps, and I assumed the quad shocks
were all 4.
Sorry,
Jeff
The quad shocks are only in a pair. You can't install more than two on our cars. The quad shocks are axle dampers. They are placed horizontally on the diff to the frame. 2 shocks are a complete set.
Yes, I know. I thought this also included the VERTICAL shocks too! Hence the "quad" shocks, 2 vertical & 2 horizontal.
Sorry for the misunderstanding.
Jeff
No worries. Parts still need a home.
You have a PM Vinnie.
I was on it like stink on a monkey !!!
Did you get a chance to snag some pics? The scoops I definetly want. I was just wondering the condition of the taillights.
Sorry about the delay,I'll have info for you today, I promise.
My son stayed with a friend tonight, still has the camera. I did check them out, and they have no dents in the metal trim. Dirty, yes. I'll clean them up a bit before pics. They came from a Turbo Coupe. I pulled them a few years ago and forgot I had them.
More sold, more added.
Again, more sold, more added. Who needed pics of something? All my parts are in great shape. I won't send .
Hi Vinnie, i would take one of the distributor covers and perhaps one of the control panel sheets? Do you have a pic of what they look like so i can see it?
Thanks,
David
O.K., the console panel graphics are not a sheet. They are the individual markings on black vinyl. I cleaned my panel, sanded it, painted it gloss black, applied the graphics and cleared it with satin clear. It's still in excellent shape after two wicked hot summers.
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF8275.jpg)
Does it matter that i have the joystick mirror control on my panel, or that will work with the markings also?
PM me a total and paypal address for the taillights and hood scoops.
I'll send you my PayPal info. I forgot the light pics. Let me get them right after work today. I apologize about that. My fault.
I really have not seen but a couple of the joystick style panels. I can't say. There are markings for a dual power seat panel on the sheet. Like in my pic of my panel. I wish I could tell you more.
Vinnie, I have the joystick mirror control on my 83 and the panel is textured also, where my 86 XR7 is flat. That being said, in your travels if you come across a decent center armrest cover I need one. Thanks
Dan, I may have a good cover. I'll let you know this evening.
Hey Vin,
What kind of mileage was on those quads? i know you DON'T sale no junk, but I was wondering about how new they were.
Thanks, Joe
They have about 50,000 miles on them. The rubber looks great, the shocks are not beat up or rusty.
Vinnie, the ecu I bought from you a while back turned out to be a DOA. do you happen to have another or know where to get one for a speed density HO? thanks
When did you get it from me? I don't even remember it. I'll look around for another ECM, though. Give me a little time. Stay tuned.
I want to say it was around the end of 2009 or the beginning of 2010, it was when I bought the intake and cam.... pretty sure this is what I am lacking to have my 5.0 running
I can't remember back that far. I'll let you know what I find.
New stuff, new prices. Needs to go.
can i get a pic of the ac delete power steering bracket? i know an S10 that needs a better setup than it has
It's not an a/c delete bracket, it's the Fox Stang steering pump bracket that's required for our cars if we want to use the FMS a/c delete bracket.
up...................
Hey! Vinnie you still got them 5.0 motor mounts, if so would they fit the 4cyl turbo coupe k -member?
I do have mounts, but have no idea if they'll fit that K-member. I think they will, but no promises.
If it's an '87-88 TC they will. :)
Awsome I might have to get them for a 5.0 swap then. Thanks COUGARMAN!
They are ready to ship.
Vinnie
Do you still have the center, center console cover, and the and graphics for the console? If so please send pics.
What do you mean by "console cover"?
Here's my center panel after I "restored" it with a little paint, my graphics, and some satin clear....
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF8275.jpg)
Quit shaking! I'd like to see how they look. LOL
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF8274.jpg)
Thanks Vinnie! Looks pretty nice.
New parts added...check it.
Hey Vinnie, sell me that shift for $100.
What would you want to make mine look like that? I have tried many times and never came out nice...
I'm still thinking about the price. I believe these are uber rare......I could be wrong.
Can you take the metal center plate out of your panel? If so, and it's a decent panel, send it to me, and I'll do it for $25.00 plus the shipping.
I'll take a pic of it and you let me know if it's good to do it with.
Just let me know.